Our Brands

FeeTech

1 2 3
Sort Alphabetically: Z to A
15 Per Page
SCS0009, 2.3KG Serial Bus Servo (6V)
US$17.97
The SCS0009 is a miniature servo that packs a punch. It uses a combination of gears to maximize performance. It has a no-load speed of 143RPM and can output torque of 2.3kg*cm.
In stock
+ −
Add to wish list
Micro Servo with Position Feedback FB90
US$11.13
This version of the FS90 micro servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output. This extra information enables more complex robotics applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
In stock
+ −
Add to wish list
FT90R 4.8-6V 360 degree Continuous Rotation Digital Servo
US$10.43
The FT90R is a micro-sized digital servo that has been built by FEETECH specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 170 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels (FS90R-W) and your robot is ready to roll!
In stock
+ −
Add to wish list
FT6335M FeeTech 360 Degrees Digital Servo 7.4V 35kg/cm
US$40.72
The FeeTech 360 Degrees Digital Servo 7.4V 35kg/cm FT6335M comes with a PA+Aluminum case. The operating voltage range is 6 - 7.4 V and pulse width range 500~2500 usec.
In stock
+ −
Add to wish list
FT5335M FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo
US$49.94
The FEETECH FT5335M servo is all about torque. This 1/4-scale digital servo can deliver an incredible 550 oz-in of torque at 7.4 V or 480 oz-in at 6 V thanks to its powerful motor and all-metal gear train. The FT5335M is a high-voltage servo, offering an operating voltage range of 6 V to 7.4 V. Servo horns and associated hardware are included. Key specs at 7.4 V: 0.18 sec/60°, 550 oz-in (40 kg-cm), 180 g. This servo works with standard RC servo pulses and has a 12″ (30 cm) cable that is terminated with a standard Futaba J connector. Unlike typical hobby servos, the FT5335M has an operating voltage range of 6 V to 7.4 V.
In stock
+ −
Add to wish list
FT5313M High-Torque Digital Servo
US$62.93
The FT5313M is a standard-size digital servo from FEETECH that can deliver over twice the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the FT5121M, which has identical dimensions to the FT5313M). The output shaft is supported by two ball bearings for reduced friction. The FT5313M works with standard RC servo pulses, providing a running angle of approximately 120° over a servo pulse range of 900 µs to 2100 µs. Many hobby servos can be operated beyond their standard ranges by using a wider pulse range, but please note that in our tests, we were not able to expand the range of the FT5313M significantly beyond 120° (the servo did not respond to pulses below around 800 µs or above around 2100 µs, providing an approximate expanded range of 135°). This servo has a 10″ (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+ −
Add to wish list
FT5121M High-Torque, High-Voltage Digital Servo
US$67.13
The FT5121M is a standard-size digital servo from FEETECH that can deliver over three times the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo, which can deliver 550 oz-in at 7.4 V, and if you need more speed in a servo with the same dimensions as the FT5121M, consider the FT5313M). The output shaft is supported by two ball bearings for reduced friction.
In stock
+ −
Add to wish list
FT1117M FEETECH Mini Servo
US$11.78
Key specs at 6 V: 0.11 sec/60°, 50 oz-in (3.5 kg-cm), 20 g. The FT1117M is a miniature-sized servo from FEETECH with the same output spline as standard servos, making it compatible with standard-size servo horns. The pinion gear is plastic, but the rest of the gear train consists of all metal gears, allowing this servo to deliver the kind of speed and torque typically associated with larger servos.
In stock
+ −
Add to wish list
FT-DCL5-C001, FeeTech 3VDC L-Shaped Gear Motor 90 Degree Shaft (120:1 Gear ratio)
US$2.68
Suggested Voltage: 3VDC, No Load Speed: 50 ±10 rpm, No Load Current: 150mA, Stall Current: 750mA, Torque: 3Kgf.cm min.
In stock
+ −
Add to wish list
FT-DC50-C001, FeeTech 3VDC Gear Motor 90 Degree Shaft (120:1 Gear ratio)
US$2.68
Suggested Voltage: 3VDC, No Load Speed: 50 ±10 rpm, No Load Current: 150mA, Stall Current: 750mA, Torque: 3Kgf.cm min.
In stock
+ −
Add to wish list
FT-DC-M001 Top Plate for 2WD Robot Chassis Kit
US$6.99
This top plate fits on top of the FT-DC- 002 2WD Robot Chassis Kit to provide an extra working area on the chassis. Made of anodized aluminum to match the top plate on the FT-DC- 002 Robot chassis Kit. Includes mounting hardware.
In stock
+ −
Add to wish list
FT-DC-002 2WD Robot Chassis Kit
US$24.95
This metal 2WD Robot Chassis Kit with DC Motors provides you with a high quality metal chassis frame complete with two DC motors, matching wheels and caster as well as a top metal plate with mounting hardware. You can easily make a line tracking car, obstacle avoidance car or remote control vehicle by adding your own microcontroller such as an Arduino or Raspberry PI with a power supply, motor controller and sensors. Additional top plates (FT-DC- M001) are available to provide extra working area on your chassis. Note: Battery pack is not included.
In stock
+ −
Add to wish list
FT-6365-C001 FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo
US$90.77
The FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo comes with a steel gear. It runs on an operating voltage range between 4.8 V - 8.4 V and Idle current (at stopped): 30 mA at 7.4 V. The pulse width range is 500 ~ 2.500 μ sec.
In stock
+ −
Add to wish list
FT-60RW-C002, Wheel for FeeTech DC-50 and DC-L50 DC Gear Motor, 60×8mm, Black
US$1.77
The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with our universal mounting hubs for 3mm shafts, 4mm shafts, and 5mm shafts.
In stock
+ −
Add to wish list
FT-4WD-KIT Mobile Robot Platform Chassis Kit – 4WD with DC Motors
US$34.93
This Metal 4WD Robot Mobile Platform Chassis Kit with DC Motors will provide you with a high quality DIY shell on which you can put your power supply, microcontroller, motor controller, sensors and etc., on a tiny light weight frame.
In stock
+ −
Add to wish list
1 2 3