Our Brands

FeeTech

1 2 3
Sort by Price: High to Low
15 Per Page
FT-6365-C001 FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo
US$90.77
The FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo comes with a steel gear. It runs on an operating voltage range between 4.8 V - 8.4 V and Idle current (at stopped): 30 mA at 7.4 V. The pulse width range is 500 ~ 2.500 μ sec.
In stock
+ −
Add to wish list
FT5121M High-Torque, High-Voltage Digital Servo
US$67.13
The FT5121M is a standard-size digital servo from FEETECH that can deliver over three times the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo, which can deliver 550 oz-in at 7.4 V, and if you need more speed in a servo with the same dimensions as the FT5121M, consider the FT5313M). The output shaft is supported by two ball bearings for reduced friction.
In stock
+ −
Add to wish list
FT5313M High-Torque Digital Servo
US$62.93
The FT5313M is a standard-size digital servo from FEETECH that can deliver over twice the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the FT5121M, which has identical dimensions to the FT5313M). The output shaft is supported by two ball bearings for reduced friction. The FT5313M works with standard RC servo pulses, providing a running angle of approximately 120° over a servo pulse range of 900 µs to 2100 µs. Many hobby servos can be operated beyond their standard ranges by using a wider pulse range, but please note that in our tests, we were not able to expand the range of the FT5313M significantly beyond 120° (the servo did not respond to pulses below around 800 µs or above around 2100 µs, providing an approximate expanded range of 135°). This servo has a 10″ (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+ −
Add to wish list
FT5335M FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo
US$49.94
The FEETECH FT5335M servo is all about torque. This 1/4-scale digital servo can deliver an incredible 550 oz-in of torque at 7.4 V or 480 oz-in at 6 V thanks to its powerful motor and all-metal gear train. The FT5335M is a high-voltage servo, offering an operating voltage range of 6 V to 7.4 V. Servo horns and associated hardware are included. Key specs at 7.4 V: 0.18 sec/60°, 550 oz-in (40 kg-cm), 180 g. This servo works with standard RC servo pulses and has a 12″ (30 cm) cable that is terminated with a standard Futaba J connector. Unlike typical hobby servos, the FT5335M has an operating voltage range of 6 V to 7.4 V.
In stock
+ −
Add to wish list
FT6335M FeeTech 360 Degrees Digital Servo 7.4V 35kg/cm
US$40.72
The FeeTech 360 Degrees Digital Servo 7.4V 35kg/cm FT6335M comes with a PA+Aluminum case. The operating voltage range is 6 - 7.4 V and pulse width range 500~2500 usec.
In stock
+ −
Add to wish list
FT-4WD-KIT Mobile Robot Platform Chassis Kit – 4WD with DC Motors
US$34.93
This Metal 4WD Robot Mobile Platform Chassis Kit with DC Motors will provide you with a high quality DIY shell on which you can put your power supply, microcontroller, motor controller, sensors and etc., on a tiny light weight frame.
In stock
+ −
Add to wish list
FR0115M-KIT Metal Gear Digital Servo for Arduino Robot with Hardware
US$27.93
This Metal Gear Digital Servo for Arduino Robot is a low price high quality digital robot servo.
In stock
+ −
Add to wish list
FT-2WD-KIT Mobile Robot Platform Chassis Kit - 2WD with DC Motors
US$27.93
This kit gives you everything you need to build the shell of a 2-wheel-drive Robot Rover! You get the chassis, 4-6 VDC motors and wheels. You'll fill in the rest with power supply, microcontroller or microcomputer and a dual H-bridge motor controller.
In stock
+ −
Add to wish list
FT-DC-002 2WD Robot Chassis Kit
US$24.95
This metal 2WD Robot Chassis Kit with DC Motors provides you with a high quality metal chassis frame complete with two DC motors, matching wheels and caster as well as a top metal plate with mounting hardware. You can easily make a line tracking car, obstacle avoidance car or remote control vehicle by adding your own microcontroller such as an Arduino or Raspberry PI with a power supply, motor controller and sensors. Additional top plates (FT-DC- M001) are available to provide extra working area on your chassis. Note: Battery pack is not included.
In stock
+ −
Add to wish list
FS5323M Metal Gear Digital Servo w/Metal Servo Arm
US$24.95
The FS5323M Metal Gear Digital Servo is a high quality digital servo that is perfect for low cost high torque applications in robotics projects. Comes with a metal anodized servo arm to provide solid thrust transfer. This servo is capable of replacing standard analog servos with the increased speed and torque of a digital servo. This servo can produce high-current draw from your batteries.
Delivery within 2-3 weeks
+ −
Add to wish list
FS5115M FEETECH High-Torque Servo
US$22.33
The FS5115M is a standard-size analog servo from FEETECH that delivers extra-high torque thanks to its powerful motor and all-metal gear train normally associated with much more expensive or larger servos. Comes with attachments and associated hardware. The output shaft is supported by two ball bearings for reduced friction. The FS5115M works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 500 µs to 2500 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+ −
Add to wish list
FR5311M Motor Metal Digital Servo Mode with Continuous Rotation Mode
US$21.61

This is a metal gear digital servo mode motor which can also be used as a continuous mode motor with programming.

In stock
+ −
Add to wish list
FEETECH Standard Servo FS5103B-FB with Position Feedback
US$19.97
This version of the FS5103B standard servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output. This extra information enables more complex robotics applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
In stock
+ −
Add to wish list
SCS0009, 2.3KG Serial Bus Servo (6V)
US$17.97
The SCS0009 is a miniature servo that packs a punch. It uses a combination of gears to maximize performance. It has a no-load speed of 143RPM and can output torque of 2.3kg*cm.
In stock
+ −
Add to wish list
FR0115M Metal Gear Digital Servo for Arduino Robots
US$17.49
The FR0115M Metal Gear Digital Servo for Arduino Robot is a high quality digital robot servo. This servo is used in robots or where standard servos are used. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering approximately 2A for each servo. This servo also has different applications for DIY robot.
In stock
+ −
Add to wish list
1 2 3