FeeTech

1 2 3
US$4.19
This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less expensive than a micro servo (continuous or non-continuous) because there is no control board inside.
In stock
+
Add to wish list

US$9.09
This kit includes the FS90R-W Wheel and the FS90R Servo.
In stock
+
Add to wish list

US$5.70
This is a great general purpose-actuator for tiny mechanisms. The FS90 offers positive control over a 120 degree angle. Operating angle controlled by standard servo pulses between 900us and 2100us. Has a three wire connector for the power, ground and signal inputs.
In stock
+
Add to wish list

US$22.33
The FS5115M is a standard-size analog servo from FEETECH that delivers extra-high torque thanks to its powerful motor and all-metal gear train normally associated with much more expensive or larger servos. Comes with attachments and associated hardware. The output shaft is supported by two ball bearings for reduced friction. The FS5115M works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 500 µs to 2500 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+
Add to wish list

US$6.20
At 6 V, it has a maximum rotation speed of around 130 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque.
In stock
+
Add to wish list

US$27.93
This Metal Gear Digital Servo for Arduino Robot is a low price high quality digital robot servo.
In stock
+
Add to wish list

US$12.53
Dimensions: 40.8 × 20.1 × 38 mm, Weight: 36 g, Operating Speed: 0.18sec/60degree (4.8V)0.16sec/60degree (13V), Stall Torque: 3kg.cm/41.74oz.in(4.8V) 3.2kg.cm/44.52oz.in(6V), Operating Voltage: 4.8V~6V.
In stock
+
Add to wish list

US$16.73
The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. Key specs at 6 V: 95 RPM (no-load), 83 oz-in (6 kg-cm), 40 g.
In stock
+
Add to wish list

US$3.15
The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with our universal mounting hubs for 3mm shafts, 4mm shafts, and 5mm shafts.
In stock
+
Add to wish list

US$24.95
The FS5323M Metal Gear Digital Servo is a high quality digital servo that is perfect for low cost high torque applications in robotics projects. Comes with a metal anodized servo arm to provide solid thrust transfer. This servo is capable of replacing standard analog servos with the increased speed and torque of a digital servo. This servo can produce high-current draw from your batteries.
Delivery within 2-3 weeks
+
Add to wish list

US$13.93
Dimensions: 40.8 × 20.1 × 38 mm, Weight: 40 g, Operating Speed: 0.18sec/60degree (4.8V) 0.16sec/60degree (7V), Stall Torque: 5kg.cm/69.56oz.in(4.8V) 6kg.cm/83.47oz.in(6V), Operating Voltage: 4.8V~6V.
In stock
+
Add to wish list

US$24.95
This metal 2WD Robot Chassis Kit with DC Motors provides you with a high quality metal chassis frame complete with two DC motors, matching wheels and caster as well as a top metal plate with mounting hardware. You can easily make a line tracking car, obstacle avoidance car or remote control vehicle by adding your own microcontroller such as an Arduino or Raspberry PI with a power supply, motor controller and sensors. Additional top plates (FT-DC- M001) are available to provide extra working area on your chassis. Note: Battery pack is not included.
In stock
+
Add to wish list

US$27.93
This kit gives you everything you need to build the shell of a 2-wheel-drive Robot Rover! You get the chassis, 4-6 VDC motors and wheels. You'll fill in the rest with power supply, microcontroller or microcomputer and a dual H-bridge motor controller.
In stock
+
Add to wish list

US$14.33
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included. Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.
In stock
+
Add to wish list

US$10.43
The FT90R is a micro-sized digital servo that has been built by FEETECH specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 170 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels (FS90R-W) and your robot is ready to roll!
In stock
+
Add to wish list
1 2 3