FeeTech

US$40.72
The FeeTech 360 Degrees Digital Servo 7.4V 35kg/cm FT6335M comes with a PA+Aluminum case. The operating voltage range is 6 - 7.4 V and pulse width range 500~2500 usec.
In stock
+
Add to wish list

US$90.77
The FeeTech 7.4V 65kg 360 Degree Magnetic Encoders Steel Gear Servo comes with a steel gear. It runs on an operating voltage range between 4.8 V - 8.4 V and Idle current (at stopped): 30 mA at 7.4 V. The pulse width range is 500 ~ 2.500 μ sec.
In stock
+
Add to wish list

US$1.77
The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with our universal mounting hubs for 3mm shafts, 4mm shafts, and 5mm shafts.
In stock
+
Add to wish list

US$2.68
Suggested Voltage: 3VDC, No Load Speed: 50 ±10 rpm, No Load Current: 150mA, Stall Current: 750mA, Torque: 3Kgf.cm min.
In stock
+
Add to wish list

US$2.68
Suggested Voltage: 3VDC, No Load Speed: 50 ±10 rpm, No Load Current: 150mA, Stall Current: 750mA, Torque: 3Kgf.cm min.
In stock
+
Add to wish list

US$17.97
The SCS0009 is a miniature servo that packs a punch. It uses a combination of gears to maximize performance. It has a no-load speed of 143RPM and can output torque of 2.3kg*cm.
In stock
+
Add to wish list

US$21.61

This is a metal gear digital servo mode motor which can also be used as a continuous mode motor with programming.

In stock
+
Add to wish list

US$11.13
This version of the FS90 micro servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output. This extra information enables more complex robotics applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
In stock
+
Add to wish list

US$19.97
This version of the FS5103B standard servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output. This extra information enables more complex robotics applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control.
In stock
+
Add to wish list

US$24.95
The FS5323M Metal Gear Digital Servo is a high quality digital servo that is perfect for low cost high torque applications in robotics projects. Comes with a metal anodized servo arm to provide solid thrust transfer. This servo is capable of replacing standard analog servos with the increased speed and torque of a digital servo. This servo can produce high-current draw from your batteries.
Delivery within 2-3 weeks
+
Add to wish list

US$10.43
The FT90R is a micro-sized digital servo that has been built by FEETECH specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 170 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels (FS90R-W) and your robot is ready to roll!
In stock
+
Add to wish list

US$67.13
The FT5121M is a standard-size digital servo from FEETECH that can deliver over three times the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the larger FT5335M giant servo, which can deliver 550 oz-in at 7.4 V, and if you need more speed in a servo with the same dimensions as the FT5121M, consider the FT5313M). The output shaft is supported by two ball bearings for reduced friction.
In stock
+
Add to wish list

US$62.93
The FT5313M is a standard-size digital servo from FEETECH that can deliver over twice the torque of our standard-size servos with plastic gears thanks to its powerful coreless motor and all-metal gear train (if you need even more torque than this, check out the FT5121M, which has identical dimensions to the FT5313M). The output shaft is supported by two ball bearings for reduced friction. The FT5313M works with standard RC servo pulses, providing a running angle of approximately 120° over a servo pulse range of 900 µs to 2100 µs. Many hobby servos can be operated beyond their standard ranges by using a wider pulse range, but please note that in our tests, we were not able to expand the range of the FT5313M significantly beyond 120° (the servo did not respond to pulses below around 800 µs or above around 2100 µs, providing an approximate expanded range of 135°). This servo has a 10″ (25 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+
Add to wish list

US$8.05
This is a great general-purpose actuator for tiny mechanisms. The FS0307 is a very small 4.4 g analog servo from FEETECH (formerly known as Fitec) that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse range can be expanded to achieve an expanded operating angle, but the limits of this are not specified by FEETECH. (In our tests, we were able to get an expanded range of approximately 180° over a pulse range of 650 µs to 2500 µs, but as this is not part of FEETECH’s official specifications, it is possible different units will behave differently in this regard.)
In stock
+
Add to wish list

US$7.49
This is a great general-purpose actuator for tiny mechanisms. The FS0403 is a very small 5 g analog servo from FEETECH (formerly known as Fitec) that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse range can be expanded to achieve an expanded operating angle, but the limits of this are not specified by FEETECH. (In our tests, we were able to get an expanded range of approximately 180° over a pulse range of 650 µs to 2500 µs, but as this is not part of FEETECH’s official specifications, it is possible different units will behave differently in this regard.) The servo has a 6″ (15 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible, and it includes additional servo horns and mounting hardware.
In stock
+
Add to wish list

US$14.33
The FS5103B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included. Key specs at 6 V: 0.16 sec/60°, 53 oz-in (3.8 kg-cm), 40 g.
In stock
+
Add to wish list

US$16.73
The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. Key specs at 6 V: 95 RPM (no-load), 83 oz-in (6 kg-cm), 40 g.
In stock
+
Add to wish list

US$17.49
The FR0115M Metal Gear Digital Servo for Arduino Robot is a high quality digital robot servo. This servo is used in robots or where standard servos are used. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering approximately 2A for each servo. This servo also has different applications for DIY robot.
In stock
+
Add to wish list

US$49.94
The FEETECH FT5335M servo is all about torque. This 1/4-scale digital servo can deliver an incredible 550 oz-in of torque at 7.4 V or 480 oz-in at 6 V thanks to its powerful motor and all-metal gear train. The FT5335M is a high-voltage servo, offering an operating voltage range of 6 V to 7.4 V. Servo horns and associated hardware are included. Key specs at 7.4 V: 0.18 sec/60°, 550 oz-in (40 kg-cm), 180 g. This servo works with standard RC servo pulses and has a 12″ (30 cm) cable that is terminated with a standard Futaba J connector. Unlike typical hobby servos, the FT5335M has an operating voltage range of 6 V to 7.4 V.
In stock
+
Add to wish list

US$11.78
Key specs at 6 V: 0.11 sec/60°, 50 oz-in (3.5 kg-cm), 20 g. The FT1117M is a miniature-sized servo from FEETECH with the same output spline as standard servos, making it compatible with standard-size servo horns. The pinion gear is plastic, but the rest of the gear train consists of all metal gears, allowing this servo to deliver the kind of speed and torque typically associated with larger servos.
In stock
+
Add to wish list

US$6.99
This top plate fits on top of the FT-DC- 002 2WD Robot Chassis Kit to provide an extra working area on the chassis. Made of anodized aluminum to match the top plate on the FT-DC- 002 Robot chassis Kit. Includes mounting hardware.
In stock
+
Add to wish list

US$24.95
This metal 2WD Robot Chassis Kit with DC Motors provides you with a high quality metal chassis frame complete with two DC motors, matching wheels and caster as well as a top metal plate with mounting hardware. You can easily make a line tracking car, obstacle avoidance car or remote control vehicle by adding your own microcontroller such as an Arduino or Raspberry PI with a power supply, motor controller and sensors. Additional top plates (FT-DC- M001) are available to provide extra working area on your chassis. Note: Battery pack is not included.
In stock
+
Add to wish list

US$22.33
The FS5115M is a standard-size analog servo from FEETECH that delivers extra-high torque thanks to its powerful motor and all-metal gear train normally associated with much more expensive or larger servos. Comes with attachments and associated hardware. The output shaft is supported by two ball bearings for reduced friction. The FS5115M works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 500 µs to 2500 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible.
In stock
+
Add to wish list

US$34.93
This Metal 4WD Robot Mobile Platform Chassis Kit with DC Motors will provide you with a high quality DIY shell on which you can put your power supply, microcontroller, motor controller, sensors and etc., on a tiny light weight frame.
In stock
+
Add to wish list

US$4.19
This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less expensive than a micro servo (continuous or non-continuous) because there is no control board inside.
In stock
+
Add to wish list

US$27.93
This kit gives you everything you need to build the shell of a 2-wheel-drive Robot Rover! You get the chassis, 4-6 VDC motors and wheels. You'll fill in the rest with power supply, microcontroller or microcomputer and a dual H-bridge motor controller.
In stock
+
Add to wish list

US$2.59
When your little robot needs someone to lean on, it can lean on this support wheel. Perfect for use with 2-wheeled robots that need a third-point of support, this Support Wheel comes attached to a mounting plate and with 4x screws and 4x nuts for fastening to any robot or project. It can rotate a full 360° on the plate and the sleek black metal look suits any robot.
Delivery within 2-3 weeks
+
Add to wish list

US$9.09
This kit includes the FS90R-W Wheel and the FS90R Servo.
In stock
+
Add to wish list

US$3.15
The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with our universal mounting hubs for 3mm shafts, 4mm shafts, and 5mm shafts.
In stock
+
Add to wish list

US$5.59
FK-UB-001 Aluminum U-shaped Bracket Set For Servo FR0115M
In stock
+
Add to wish list

US$5.59

Applied to FEETECH Servo FR0109M FR0115M SCS09 SCS15. Include: FK-AP-19 (25T) -1PCS, FK-AP-20 -1PCS. Screws: M3*4  -8PCS, M3*6  -1PCS, TP1P 2 * 6 mm -8PCS.

In stock
+
Add to wish list

US$27.93
This Metal Gear Digital Servo for Arduino Robot is a low price high quality digital robot servo.
In stock
+
Add to wish list

US$6.20
At 6 V, it has a maximum rotation speed of around 130 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque.
In stock
+
Add to wish list

US$5.70
This is a great general purpose-actuator for tiny mechanisms. The FS90 offers positive control over a 120 degree angle. Operating angle controlled by standard servo pulses between 900us and 2100us. Has a three wire connector for the power, ground and signal inputs.
In stock
+
Add to wish list

US$12.53
Dimensions: 40.8 × 20.1 × 38 mm, Weight: 36 g, Operating Speed: 0.18sec/60degree (4.8V)0.16sec/60degree (13V), Stall Torque: 3kg.cm/41.74oz.in(4.8V) 3.2kg.cm/44.52oz.in(6V), Operating Voltage: 4.8V~6V.
In stock
+
Add to wish list

US$13.93
Dimensions: 40.8 × 20.1 × 38 mm, Weight: 40 g, Operating Speed: 0.18sec/60degree (4.8V) 0.16sec/60degree (7V), Stall Torque: 5kg.cm/69.56oz.in(4.8V) 6kg.cm/83.47oz.in(6V), Operating Voltage: 4.8V~6V.
In stock
+
Add to wish list