EMAX

US$11.60
ES08MA II Emax 12g/ 1.8kg/10sec Metal Gear Servo, CCW
In stock
+
Add to wish list

US$1.50
These propeller nuts or motor nuts are designed to be screw in for clockwise thread. The RS2205-S is like the typical rs2205 expect with a major redesign from the ground up for better performance! The screw for these motors only go in one direction, which is clockwise. The shaft is designed to prevent slippage or accidental cases where the nut may fly off. These nuts are only for the RS2205-S motors!
In stock
+
Add to wish list

US$1.50
These propeller nuts or motor nuts are designed to be screw in for clockwise thread. The RS2205-S is like the typical rs2205 expect with a major redesign from the ground up for better performance! The screw for these motors only go in one direction, which is clockwise. The shaft is designed to prevent slippage or accidental cases where the nut may fly off. These nuts are only for the RS2205-S motors!
In stock
+
Add to wish list

US$1.50
This Motor/Prop nut is designed for RS2205 motors that spin counter clockwise and contain a clockwise thread. As the motor spin counter clockwise, the nut will tighten down the propeller. This nut is specifically for M5 screws threads, so any motor you have that shares the same thread will work as long as the thread is clockwise.
In stock
+
Add to wish list

US$1.50
This Motor/Prop nut is designed for RS2205 motors that spin clockwise and contain a counter clockwise thread. As the motor spin clockwise, the nut will tighten down the propeller. This nut is specifically for M5 screws threads, so any motor you have that shares the same thread will work as long as the thread is counter clockwise.
In stock
+
Add to wish list

US$16.80
This is a RaceSpec brushless motor designed from EMAX. It will spin the counter clockwise direction and the nut to lock the propeller in is designed for clockwise direction. This unit has a metal bottom for better heat dissipation, is based off of N52 Magnets and uses high quality NSK Bearings from Japan.
In stock
+
Add to wish list

US$25.13
This motor will spin Clockwise and the motor shaft is inserted counter clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a beautiful foam padding. The specs on the side of the box offers a reminder when storing or opening for the first time what speed the motors run at. Motors are pre-soldered with bullet connector.
In stock
+
Add to wish list

US$25.13
This motor will spin Counter Clockwise and the motor shaft is inserted clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a beautiful foam padding. The specs on the side of the box offers a reminder when storing or opening for the first time what speed the motors run at. Motors are pre-soldered with bullet connector.
In stock
+
Add to wish list

US$2.45
These connectors are constructed from the highest quality materials to ensure you get the best connection every time, whatever your application. This package includes one pair (male and female) of these heavy-duty connectors. They are able to accommodate heavy-duty 8AWG wire and are rated to handle up to 300 amps of current.
In stock
+
Add to wish list

US$22.39
This ESC/BEC has a low-voltage, overheat, throttle and signal loss protection integrated. These ESCs do not come with bullet connectors soldered on the wires. We recommend purchasing some heat shrink and bullet connectors that will allow you to replace your ESC or change motors when you want. Using BLHeli suite you can reprogram the ESCs on the computer using a Arduino nano.
In stock
+
Add to wish list

US$16.73
This ESC has a built in linear BEC that has low-voltage protection, over-heat protection, throttle and signal loss protection integrated. These ESC do not come with bullet connectors soldered on, we recommend purchasing some with heat shrink for secure and nonconductive connections. This ESC supports OneShot125 offering better and faster brake times.
In stock
+
Add to wish list

US$33.53
The CC3D boards are an all-in-one stabilization hardware which runs the OpenPilot firmware. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the OpenPilot Ground Control Station (GCS) software. The retail CC3D Atom board comes with the CC3D Atom board, an assortment of wires to connect to the Flexi port, main port and Flexi I/O port.
In stock
+
Add to wish list

US$139.93
For those who already have a quadcopter frame and require motors can purchase this product and not have worry about the pairing all the electrical components to get their drones up and flying. The pre-selected motors, escs and propellers makes the building process a lot easier. This kit is designed specifically for drones that follow the 250 Quad Guideline. They can weigh from 110 grams to 200 grams and are 250mm from the motor to the center of the drone.
Delivery within 2-3 weeks
+
Add to wish list

US$9.73
Accidently crashed your quadcopter, want to build your own custom copter and you are looking for a 5 inch propeller diameter and a pitch of 3 inch? This product can help you replace blades resulting in multiple crashes and draws less current than a standard blade.  
In stock
+
Add to wish list

US$6.93
If you accidently stripped the screws or broke some standoffs, we offer a package of replacement pieces if needed. If in case you crash your drone and order a replacement bottom frame you are required to salvage from the crash the screws, spacers and nuts to reassemble the quad. This package will offer the required nuts spacers and screws replacements all neatly packaged within a small plastic resealable bag.  
In stock
+
Add to wish list

US$15.33
If you have accidently crashed your NightHawk 250 II Carbon Fiber we could recommend purchasing this replacement part to fix your drone. This board is comprised of acrylic with carbon fiber layer resulting in a lightweight frame. Attached your ESC to this board to save space.
In stock
+
Add to wish list

US$24.99
If you have accidently crashed your NightHawk 250 II Carbon Fiber we could recommend purchasing this replacement part to fix your drone. This board is comprised of acrylic with carbon fiber layer resulting in a lightweight frame.
In stock
+
Add to wish list

US$15.33
If you have accidently crashed your NightHawk 250 II Carbon Fiber we could recommend purchasing this replacement part to fix your drone. This board is comprised of acrylic with carbon fiber layer resulting in a lightweight frame.
In stock
+
Add to wish list

US$15.33
If you have accidently crashed your NightHawk 250 II Carbon Fiber we could recommend purchasing this replacement part to fix your drone. This board is comprised of acrylic with carbon fiber layer resulting in a lightweight replacement arm.
In stock
+
Add to wish list

US$30.73
From the Cooling Series this motor will spin Counter Clockwise and the motor shaft is inserted clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$30.73
From the Cooling Series this motor will spin Clockwise and the motor shaft is inserted counter clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage. The motors themselves have indicators to tell the direction they spin.
In stock
+
Add to wish list

US$33.25
From the Racing Spec Series this motor will spin Counter Clockwise and the motor shaft is inserted clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$33.25
From the Racing Spec Series this motor will spin Clockwise and the motor shaft is inserted counter clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$23.73
From the EMAX this motor will spin Counter Clockwise and the motor shaft is inserted clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$23.73
From the EMAX this motor will spin Clockwise and the motor shaft is inserted counter clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$20.93
From the EMAX this motor will spin Clockwise and the motor shaft is inserted counter clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$33.95
From the Cooling Series this motor will spin Clockwise and the motor shaft is inserted counter clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage.
In stock
+
Add to wish list

US$33.95
From the Cooling Series this motor will spin Counter Clockwise and the motor shaft is inserted clockwise. It has a nice metallic body that allows it to dissipate any heat buildup. Comes with the required screws and motor mount in a plastic box and some padding. The specs on the back of the box offers a reminder when storing or opening for the first time what direction and speed the motors run at. Motors require a bullet connector to be soldered for usage. 
In stock
+
Add to wish list