Eisco

1 2 3
US$875.00
More advanced Spectrometer, Easy to set-up and use.Includes grating and holder, prism, illuminated magnifier, auto-collimation mirror, and detailed instruction manual. Supplied in wooden carrying case. This instrument whilst robust enough for individual student use also intended for more advanced work. Scale 150 mm diameter circle is fixed, and the table and telescope movements are completely independent of each other. Both movements can be read to 30 sec. of arc by means of double ended verniers. Both rotations have fine adjustment screws, and release of a clamping screw enables coarse adjustment to be made by hand.
Delivery within 2-3 weeks
+
Add to wish list

US$784.42
This advanced ripple tank from EISCO comes complete with all accessories needed for wave investigations. Tank is intensely illuminated by a strong light source, and synchronized with the wave generator to help students observe the wave patterns on a workgroup table. The frame is made of reinforced plastic and with foam beaches (to negate reflections). Set includes: (1) Vibration Generator (1) Wave monitor unit (1) Projection screen (1) Wave dippers (1) Lever arm and support (1) Ripple tank (1) Projection mirror (1) Set of footers with adjustment screws (1) Set of lucite/perspex objects.
Delivery within 2-3 weeks
+
Add to wish list

US$444.99
Set Inculdes: Pulleys - (8) single, (2) double sheave, EISCO ball bearing frictionless pulleys. Wooden base 20 x 15 cm fitted with one vertical rod of size 61 cm x 12.5 mm and one horizontal rod size of 20 cm x 9.5 mm with clamp. Collars with hook - 6. Right angled clamp - 1. Wheel & axle - 1. Cord - 2 rolls. Tommy bar to tighten vertical rods - 1. Hooked Masses Brass, with hooks. 1 x 10g, 2 x 20g, 1 x 50g, 1 x 100g, 2 x 200g, 1 x 500g, 1 x 1000g - total 9 weights. Instructions.
Delivery within 2-3 weeks
+
Add to wish list

US$420.42
Table top tesla coil with adjustable spark gap. Also Includes two antenna plates, small neon lightbulb, mini discharge electrode and lamp socket. This hands-free Tesla coil is used to demonstrate the unusual properties of high-frequency electrical phenomena. This electrifying device teaches about transformers, electromagnetism, resonating electrical circuits, electric inductance, capacitance, and electrical power transmission.
In stock
+
Add to wish list

US$360.36
This is safe and steady with a quiet operation. Voltage supplied prolongs operating life. Spring-loaded, totally enshrouded tube sockets eliminate electrical shock hazard. Will accommodate a considerable variation in tube length. Lighted ON/OFF rocker switch provides convenient operation. 115V 60Hz. Output rating: 5000V without spectrum tube; 1000V @10mA with spectrum tube.
Delivery within 2-3 weeks
+
Add to wish list

US$308.18
The Ripple Tank is a dual purpose vesatile tank allowing all types of waves and wave motion. Supplied in foam packing and consists of the following components: Ripple Tank 40cm x 40cm. Push fit legs. Rippler motor with eccentric cam, mounted on PVC bar. Three supports for illuminator and the motor unit. Motor hanging clamps. Springs for motor support. Lamp Unit Halogen 6 volts. Hand Stroboscope. Concave Perspex Plate. Convex Perspex Plate. Rectangular perspex Plate. Curved Reflector. Barrier Large. Barrier small. Plastic roller Bar.
In stock
+
Add to wish list

US$283.92
This is a hand crank Van de Graaff Generator designed for electrostatic experiments and where a continuous source of high voltage is required. This excellent quality generator consists of an aluminum collector sphere (mounted above the neoprene belt) and a sturdy base with removable terminal housing. The clear belt housing tube allows for easy viewing of the moving parts. 1000,000 volt potential.
In stock
+
Add to wish list

US$271.81

This activity set allows students to conduct activities to illustrate electromagnetism, induction and basic transformer experiments. This kit consists of a plastic base, a laminated iron core, mounting fixtures, and six coils protected in a heat resistant film. Topics covered include Lenz' Law, Faraday's Law, how iron cores increase magnetic field strength, and electromagnetic induction itself. This versatile piece of equipment can also be used to teach about how transformers used by power companies carry electrical energy.

In stock
+
Add to wish list

US$192.92

The Worcester Circuit Board Kit contains all the components necessary to quickly construct a variety of circuits. This Worcester Board provides the basis for clear layouts of electrical circuits and reduces the number of connecting leads required. The main component is a base board fitted with cell holders and terminal posts. 

In stock
+
Add to wish list

US$165.62
The Projectile Launcher is solidly built to launch a projectile at any angle from -15° to +90° straight up. Solidly built to withstand the rigors of a hands-on lab and precision machined for reproducible results. This handy projectile launcher clamps to any table top. Compatible with electronic timer. Range up to 3m (10ft.). Infinitely adjustable by turning and locking latch to desired position. Any desired angle up to 90°. Adjusts with launcher mount and brace means maximum flexibility plus great rigidity. Measure your angle within 1/2° accuracy with inclined bob.
In stock
+
Add to wish list

US$165.62
The display will show the number of Coulombs deposited into the instrument either by current through a resistance or from a capacitor or from a source of static electricity like a charged plastic rod. A electroscope will deflect its vane but this instrument shows the charge digitally in Coulombs up to 1.999 nano Coulombs.
Delivery within 2-3 weeks
+
Add to wish list

US$144.54
This model demonstrates the conversion of mechanical energy into electrical energy, specifically a water turbine. Turbine is fitted with a transparent cover to show inner workings with inlet and outlet tubes. This is directly connected to a dynamo to generate electricity.
In stock
+
Add to wish list

US$135.92
This advanced apparatus demonstrates both longitudinal and transverse wave motions. Consisting of a number of eccentric discs supporting a series of metal rods revolving on a handle, transverse waves are obtained. Longitudinal waves are obtained from the bent rods.
Delivery within 2-3 weeks
+
Add to wish list

US$135.45
(1) base, (1) rod, (1) beaker tong, (1) crucible tong, (1) tripod stand, (1) wire gauge, (1) boss head, (1) clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush- spatula.
In stock
+
Add to wish list

US$131.45
This advanced apparatus demonstrates both longitudinal and transverse wave motions. Consisting of a number of eccentric discs supporting a series of metal rods revolving on a handle, transverse waves are obtained. Longitudinal waves are obtained from the bent rods.
In stock
+
Add to wish list

US$126.35
This Apparatus demonstrates the relationship between forces acting on a point. Simple to use—just adjust pulley position and amount of weight on demonstration board. Includes: Demonstration board, 26 x 20 in. (66 x 51cm); two aluminum pulleys, 2.0 in. dia. (50mm); mounting clamps; three nickel-plated iron hangers, 1.76 oz. (50g); 12 slotted weights, each 1.76 oz. (50mm).
In stock
+
Add to wish list

US$111.93
This 6 decade Resistance Box is easy to use with multiple value resistances and 4mm jacks. The EISCO Decade resistance Boxes are a robust solution in any electronics laboratory and ideal for testing circuits with different resistances. The ABS housing allows an easy reading of resistance values and easy changing of resistance values without having to remove them from the circuit.
In stock
+
Add to wish list

US$111.30
This is useful for demonstrating the properties of velocity. Demonstrates that the horizontal component of velocity of a body thrown vertically upward from another body moving horizontally is the same as that of the body moving horizontally.
Delivery within 2-3 weeks
+
Add to wish list

US$104.65
This decade resistance substitution box provides 4 decade ranges asgiven below and total value 0 to 11110 Ohms with a resolution of 1 Ohm. Each decade is selected using rotary switch. All resistance values are of ±1% tolerance and 2 watts maximum ratings.
Delivery within 2-3 weeks
+
Add to wish list

US$100.80
This teacher's molecular model set contains a large amount of atoms for most basic chemistry models. Includes: [45] Carbon (black), 4 Holes. [18] Oxygen (red), 1 Holes. [42] Oxygen (red), 2 Holes. [12] Oxygen (red), 4 Holes. [12] Metal (grey), 2 Holes. [10] Metal (grey), 3 Holes. [10] Metal (grey), 6 Holes. [36] Hydrogen (white), 1 Holes. [12] Sulphur (yellow), 4 Holes. [15] Nitrogen (blue), 3 Holes. [12] Phosphorus (purple), 4 Holes. [6] Phosphorus (purple), 3 Holes. [170] Medium Bonds. [100] Long (Flex) Bonds.
Delivery within 2-3 weeks
+
Add to wish list

US$99.19

This is for showing A.C. on an oscilloscope or meter or for demonstrating the use of a dynamo in lighting a lamp. This apparatus has a cycle dynamo mounted on a base. Two 4mm socket terminals are provided for the dynamo output, connected in parallel with an M.E.S. lamp holder and 2.5V bulb.

In stock
+
Add to wish list

US$98.28

This set contains two drilled balls each of the following materials: aluminum, brass, cork, lead, steel, and wood. These are perfect for pendulum experiments but can be used for a variety of lab needs. Plastic case with foam insert. 25mm in diameter. Total of 12 balls.

In stock
+
Add to wish list

US$97.99

This kit contains all the material required to build six complete motor models. Includes 12 magnets, six armatures, six pieces of mild steel yokes, six support bases, six support shafts, 24 connecting rivets, 12 split pins, one reel of 25 s.w.g., PVC tinned copper wire, two reels of cellotape, 300mm rubber tubing, and instructions.

In stock
+
Add to wish list

US$90.00
Demonstrates the molecular activity in gasses. To understand and study motion and behavior of molecules in gases. An electric motor, running at 4 to 12V DC vibrates a small platform inside a transparent tube so that a set of many small stainless steel balls are vibrated violently inside the tube.
In stock
+
Add to wish list

US$90.00
A platform is supported on spring steel strips which is made to oscillate in the horizontal plane under various loads. Two aluminum trays 130 x 50 mm., held approximately 200mm apart on spring steel strips attached to their sides. One tray has holes to take three equal mass cylinders, approximately 100 x 25 mm, length x diameter. Three support pins to fit radial holes in cylinders.
In stock
+
Add to wish list

US$83.86
Apparatus is designed to show vibrations in a stretched cord and investigate the relationship between frequency, tension and density. In addition the provision of electrical contacts, opened and closed by the vibrating armature, allow the apparatus to be used as a high speed changeover switch.
In stock
+
Add to wish list

US$77.00
Rheostat is wound with heavily oxidised constantan wire on a vitreous enamelled steel tube. The tube is supported on robust diecast end stands and the heavy duty sliding contact is of phosphor bronze, nickel plated for corrosion resistance, 4 mm terminal post are fitted facilitating external connection conventional 4 mm plug.
Delivery within 2-3 weeks
+
Add to wish list

US$73.15
Set Includes: 1 Rectangular Block 75 x 50 x 15mm. 1 Semi-Circle 90mm base x 15mm thick. 1 Equilateral Prism 75mm side, 15mm thick. 1 Double Convex Lense 90mm long, 23mm at center. 2 Double Concave Lenses 90mm long, 10mm at center.
Delivery within 2-3 weeks
+
Add to wish list

US$72.45
Projectile launcher is used to study kinematic equations, and conversion between gravitational potential and kinetic energy. Students participate in an interactive experiment for measuring the muzzle velocity of the launcher to identify varying launch angles in order to quantify the initial kinetic energy of the projectile (ball). Using their velocity calculations, students then make predictions about where the ball will land.
Delivery within 2-3 weeks
+
Add to wish list

US$69.93
This is the simplest DC electric motor model available. Comprised of a 2-pole armature wound with enameled copper wire, and a removable bar magnet to produce a permanent magnetic field, the motor also features a disc type commutator. External connection to the phosphor-bronze brush is by means of a pair of 4 mm sockets. Operates with 6-8 VDC.
Delivery within 2-3 weeks
+
Add to wish list

US$63.59
The Spouting Cylinder is made of Perspex which gives a clear view of the variation level of liquid and pressure. A spouting cylinder demonstrates that the pressure of a liquid depends on depth/height.
In stock
+
Add to wish list

US$63.05
This density cube set containts the follow metal cubes: Aluminum, Brass, Copper, Steel. 1.25" (3.2cm) cubes. Hooks installed in each cube.
Delivery within 2-3 weeks
+
Add to wish list

US$62.99

EISCO's Bridge Rectifier Box consists of four diodes connected in a bridge circuit used to convert alternating current (AC) input into direct current (DC) output. The unit features a clear circuit diagram as well, so students see the importance of diodes and how to rectify alternating current to direct current. Size: 13 x 8 x 5cm.

Delivery within 2-3 weeks
+
Add to wish list

US$62.72
Plates with matrices of 98 small circular chambers contain an iron rod, which functions as effectively as a plotting compass. The transparent plates can be arranged in various ways including as faces of a cube or as a single large two-dimensional surface. This versatility allows you to show the configuration of magnetic fields in one or two dimensions.
Delivery within 2-3 weeks
+
Add to wish list

US$62.64
To study the principle of capacitance, its relationship with charge and voltage, its dependence on surface area of conductors and dielectric medium between two plates. It consists of 120mm circular metal discs mounted on insulated supports that slide on a extruded aluminium section to adjust the distance between the two discs.
In stock
+
Add to wish list

US$62.03
This Circular Coil on a Base allows you to to observe static magnetic fields generated by a constant flowing current which affects the disposition of iron filings. A coil of wire through which a current can be passed is mounted on a plastic base and surrounds a sheet on which iron fillings can be placed. 
Delivery within 2-3 weeks
+
Add to wish list

US$61.59
This apparatus demonstrates the behavior of a bimetallic strip when heat is applied. This unit consists of a bimetallic strip on a 130mm x 80mm x 30mm base. A 12V halogen bulb is mounted right below a metallic strip. The bimetallic strip is heated by the glow of the bulb, which then bends, the circuit breaks and the bulb goes off. Once the bulb cools, the circuit becomes complete, the bulb glows and the sequence is repeated. Sockets are safety sockets.
In stock
+
Add to wish list

US$57.27
This high quality wooden pipette stand holds 24 pipettes vertically. Height is approximately 41cm. It has rubber feet for stability.
Delivery within 2-3 weeks
+
Add to wish list

US$54.50
Metalware set for laboratory use. Contains base, rod, clamp, and retort ring for lab experiments. Stainless steel rod with powder-coated base for durability. Base measures 20.0 x 12.5cm (L x W), and rod measures 600.0mm (H). Suitable for high school or college students, or ages 14 to 21.
In stock
+
Add to wish list

US$53.63
Comprising of a transparent plate having a matrix of small circular chambers, each chamber containing an iron rod and functioning independently with as a plotting compass. This plate is an excellent tool to view magnetic fields and due to its transparent nature is suitable for OHPs. Size is 250 x 250 mm.
Delivery within 2-3 weeks
+
Add to wish list

US$53.63
Rectangular sheet metal case and polythene insulated lid with finger flap to facilitate removal. Fitted with 4mm socket. Front glass window slides up to allow insertion of ionizing material in chamber.
In stock
+
Add to wish list

US$50.90
This lower cost alternative to the standard magnetic field chamber is great for the classroom. Performance with respect to the symmetry of fillings distribution is slightly decreased from the premium versions. (1) Magnetic field chamber, (1) Cylinderical bar magnet.
In stock
+
Add to wish list

US$50.90
Comprises two nickel plated forks A (440 Hz) mounted on individual boxes. One fork is provided with adjustable mass by means of which frequency may be shifted from the nominal 440 Hz .When both forks are sounded a clearly audible 'beat' is produced, its rate depending upon the difference in frequency between the forks.
In stock
+
Add to wish list

US$46.58
This set helps visualize the shapes of atomic and molecular orbitals. Contains enough individual parts to build 14 distinct models. 1s Unhybridized (1) 3d Unhybridized (5) 2s Unhybridized (1) 2s + 3 2 p orbitals Unhybridized (1) 2p Unhybridized (3) sp, sp2 sp3 Hybridized (3) Pink and purple coloured pear-shaped lobes represent the two wave phase (positive & negative) of the p and d atomic orbitals. White spheres represent the atomic nuclei. Each model comes with a transparent base for display.
Delivery within 2-3 weeks
+
Add to wish list

US$46.13
EISCO wave form helix is used to study wave behavior. The helix is a metal slinky spring that stretches for demonstrating wave forms, and can be used on stairs with a tall step height for further experimentation. The helix measures 20.0cm (H) when compressed, and has a wooden stand for display and storage.
In stock
+
Add to wish list

US$45.41
These high quality, affordable beakers are perfect for any science classroom or home lab.
Delivery within 2-3 weeks
+
Add to wish list

US$45.40
L-section launcher with holes for locating two 19 mm diameter steel balls which act as projectiles. Launcher is released by push button and projects one ball forward while allowing the other to fall freely. Demonstrate the effect of gravity on falling bodies. 2 metal spheres included.
In stock
+
Add to wish list

US$44.54
The set consists of six 20mm cubes of the following metals: brass, lead, zinc, copper, aluminum, and iron. Perfect for investigating density.
Delivery within 2-3 weeks
+
Add to wish list

US$44.54
These high quality, affordable beakers are perfect for any science classroom or home lab.
Delivery within 2-3 weeks
+
Add to wish list

US$41.36
This complete apparatus has a 15cm adjustable scale. The adjustable scale helps to prevent parallax error. Scale is marked in millimeters and mounted on sturdy 30cm support rod and a wooden base. A hook supporting a coiled spring with a mass hanger and indicator is attached to rod. 
Delivery within 2-3 weeks
+
Add to wish list

US$40.89
Organic chemistry molecular model set for scientific study. Contains 114 plastic pieces representing 50 atoms and 64 links for hands-on learning. Links for constructing single, double, and triple bonds. Plastic four-compartment box for storage. Detailed instructions for ease of use.
Delivery within 2-3 weeks
+
Add to wish list

US$40.80
A small electromagnet mounted on a plastic case with 4mm safety connections. The voltage supplied through those connections power the electromagnet (maximum of 12V). Students can observe the change in strength of the electromagnet by changing the input voltage. Paper clips are ideal to use as weights to demonstraight this.
In stock
+
Add to wish list

US$40.01
Burner has a heavy casted base giving stability to the burner. Nickel plated brass burner tube with rotatable air regulator and cylindrical riffled connector mounted on casted base. Burner Tube 12.5mm , base dia 75mm overall height 120mm (4.72") For use with LPG/Butane.
In stock
+
Add to wish list

US$39.77
These are high quality burettes are perfect for every day, high precision lab work. Borosilicate glass with PTFE key stopcock.
Delivery within 2-3 weeks
+
Add to wish list

US$38.18
These premium bunsen burners allow for complete control with both air mix adjustment and gas flow adjustment. The flame stabilizer makes them safer than standard bunsen burners. Overall height is 6.5". Accepts 6mm to 8mm inlet tubing.
Delivery within 2-3 weeks
+
Add to wish list

US$37.02
Organic and inorganic chemistry molecular model set for scientific study. Contains 86 plastic pieces representing 51 atoms and 35 links for hands-on learning. Links for constructing single, double, and triple bonds. Plastic four-compartment box for storage. Detailed instructions for ease of use. 
Delivery within 2-3 weeks
+
Add to wish list

US$36.33
Pendulum is used to investigate the oscillation period, and has a frictionless mount and an adjustable string for measuring varying changes. The kit includes a pendulum back board, mounting rod, string, and pendulum bob and stopper for hands-on experiments, and has steel construction for durability.
Delivery within 2-3 weeks
+
Add to wish list

US$36.32
Illustrates that liquid levels contained in vessels of different shapes will rise to the same level regardless of the differences in vessel shapes. This communicating vessel consists of a set of four interconnecting glass tubes of different diameters and shapes mounted on a plastic stand. This is an excellent tool for the observation of fluid dynamics.
In stock
+
Add to wish list

US$36.32
These are high quality, student grade borosilicate beakers. They come in frustration free packaging - pack of 12.
In stock
+
Add to wish list

US$36.31
This apparatus allows students to study the magnetic fields around a wire. A heavy brass wire with terminals is arranged on a clear plastic base. Also included are one each 45mm compass and six each 16mm compasses. Dimensions 7" x 3" x 4".
In stock
+
Add to wish list

US$36.31
Table clamp for laboratory use. Versatile for securing rod up to 7/16" in diameter in machined v-groove (rod sold separately). Attaches to table top up to 2.5" thick for stability. Measures 15.0 x 10.0 x 7.0cm (L x W x H). Suitable for high school or college students, or ages 14 to 21.
In stock
+
Add to wish list

US$36.29
Heavy duty stand and rod set. Base is 8" by 5" by .75". Rod is 23" in length. Powder Coated Steel Alloy Base.
In stock
+
Add to wish list

US$35.44
Premium borosilicate crown glass. R Index 1.51. 32mm x 32mm. Designed for use in quantitative spectrometers.
Delivery within 2-3 weeks
+
Add to wish list

US$35.04
These are straight form Spectrum Tubes with side electrodes and a 50mm long fine capillary tube in the middle with total length of 26 cm. Reveal the spectra of various gases when discharges pass through them.
In stock
+
Add to wish list
1 2 3