Eisco

1 2 3 4 5 6
US$73.15
Set Includes: 1 Rectangular Block 75 x 50 x 15mm. 1 Semi-Circle 90mm base x 15mm thick. 1 Equilateral Prism 75mm side, 15mm thick. 1 Double Convex Lense 90mm long, 23mm at center. 2 Double Concave Lenses 90mm long, 10mm at center.
Delivery within 2-3 weeks
+
Add to wish list

US$77.00
Rheostat is wound with heavily oxidised constantan wire on a vitreous enamelled steel tube. The tube is supported on robust diecast end stands and the heavy duty sliding contact is of phosphor bronze, nickel plated for corrosion resistance, 4 mm terminal post are fitted facilitating external connection conventional 4 mm plug.
Delivery within 2-3 weeks
+
Add to wish list

US$83.86
Apparatus is designed to show vibrations in a stretched cord and investigate the relationship between frequency, tension and density. In addition the provision of electrical contacts, opened and closed by the vibrating armature, allow the apparatus to be used as a high speed changeover switch.
In stock
+
Add to wish list

US$90.00
Demonstrates the molecular activity in gasses. To understand and study motion and behavior of molecules in gases. An electric motor, running at 4 to 12V DC vibrates a small platform inside a transparent tube so that a set of many small stainless steel balls are vibrated violently inside the tube.
In stock
+
Add to wish list

US$90.00
A platform is supported on spring steel strips which is made to oscillate in the horizontal plane under various loads. Two aluminum trays 130 x 50 mm., held approximately 200mm apart on spring steel strips attached to their sides. One tray has holes to take three equal mass cylinders, approximately 100 x 25 mm, length x diameter. Three support pins to fit radial holes in cylinders.
In stock
+
Add to wish list

US$97.99

This kit contains all the material required to build six complete motor models. Includes 12 magnets, six armatures, six pieces of mild steel yokes, six support bases, six support shafts, 24 connecting rivets, 12 split pins, one reel of 25 s.w.g., PVC tinned copper wire, two reels of cellotape, 300mm rubber tubing, and instructions.

In stock
+
Add to wish list

US$98.28

This set contains two drilled balls each of the following materials: aluminum, brass, cork, lead, steel, and wood. These are perfect for pendulum experiments but can be used for a variety of lab needs. Plastic case with foam insert. 25mm in diameter. Total of 12 balls.

In stock
+
Add to wish list

US$99.19

This is for showing A.C. on an oscilloscope or meter or for demonstrating the use of a dynamo in lighting a lamp. This apparatus has a cycle dynamo mounted on a base. Two 4mm socket terminals are provided for the dynamo output, connected in parallel with an M.E.S. lamp holder and 2.5V bulb.

In stock
+
Add to wish list

US$100.80
This teacher's molecular model set contains a large amount of atoms for most basic chemistry models. Includes: [45] Carbon (black), 4 Holes. [18] Oxygen (red), 1 Holes. [42] Oxygen (red), 2 Holes. [12] Oxygen (red), 4 Holes. [12] Metal (grey), 2 Holes. [10] Metal (grey), 3 Holes. [10] Metal (grey), 6 Holes. [36] Hydrogen (white), 1 Holes. [12] Sulphur (yellow), 4 Holes. [15] Nitrogen (blue), 3 Holes. [12] Phosphorus (purple), 4 Holes. [6] Phosphorus (purple), 3 Holes. [170] Medium Bonds. [100] Long (Flex) Bonds.
Delivery within 2-3 weeks
+
Add to wish list

US$104.65
This decade resistance substitution box provides 4 decade ranges asgiven below and total value 0 to 11110 Ohms with a resolution of 1 Ohm. Each decade is selected using rotary switch. All resistance values are of ±1% tolerance and 2 watts maximum ratings.
Delivery within 2-3 weeks
+
Add to wish list

US$111.30
This is useful for demonstrating the properties of velocity. Demonstrates that the horizontal component of velocity of a body thrown vertically upward from another body moving horizontally is the same as that of the body moving horizontally.
Delivery within 2-3 weeks
+
Add to wish list

US$111.93
This 6 decade Resistance Box is easy to use with multiple value resistances and 4mm jacks. The EISCO Decade resistance Boxes are a robust solution in any electronics laboratory and ideal for testing circuits with different resistances. The ABS housing allows an easy reading of resistance values and easy changing of resistance values without having to remove them from the circuit.
In stock
+
Add to wish list

US$126.35
This Apparatus demonstrates the relationship between forces acting on a point. Simple to use—just adjust pulley position and amount of weight on demonstration board. Includes: Demonstration board, 26 x 20 in. (66 x 51cm); two aluminum pulleys, 2.0 in. dia. (50mm); mounting clamps; three nickel-plated iron hangers, 1.76 oz. (50g); 12 slotted weights, each 1.76 oz. (50mm).
In stock
+
Add to wish list

US$131.45
This advanced apparatus demonstrates both longitudinal and transverse wave motions. Consisting of a number of eccentric discs supporting a series of metal rods revolving on a handle, transverse waves are obtained. Longitudinal waves are obtained from the bent rods.
In stock
+
Add to wish list

US$135.45
(1) base, (1) rod, (1) beaker tong, (1) crucible tong, (1) tripod stand, (1) wire gauge, (1) boss head, (1) clamp, (1) retort ring with boss head, (1) burette clamp double, (1) test tube holder, (1) test tube stand (z-shape), (1) test tube brush- spatula.
In stock
+
Add to wish list

US$135.92
This advanced apparatus demonstrates both longitudinal and transverse wave motions. Consisting of a number of eccentric discs supporting a series of metal rods revolving on a handle, transverse waves are obtained. Longitudinal waves are obtained from the bent rods.
Delivery within 2-3 weeks
+
Add to wish list

US$144.54
This model demonstrates the conversion of mechanical energy into electrical energy, specifically a water turbine. Turbine is fitted with a transparent cover to show inner workings with inlet and outlet tubes. This is directly connected to a dynamo to generate electricity.
In stock
+
Add to wish list

US$165.62
The Projectile Launcher is solidly built to launch a projectile at any angle from -15° to +90° straight up. Solidly built to withstand the rigors of a hands-on lab and precision machined for reproducible results. This handy projectile launcher clamps to any table top. Compatible with electronic timer. Range up to 3m (10ft.). Infinitely adjustable by turning and locking latch to desired position. Any desired angle up to 90°. Adjusts with launcher mount and brace means maximum flexibility plus great rigidity. Measure your angle within 1/2° accuracy with inclined bob.
In stock
+
Add to wish list

US$165.62
The display will show the number of Coulombs deposited into the instrument either by current through a resistance or from a capacitor or from a source of static electricity like a charged plastic rod. A electroscope will deflect its vane but this instrument shows the charge digitally in Coulombs up to 1.999 nano Coulombs.
Delivery within 2-3 weeks
+
Add to wish list

US$192.92

The Worcester Circuit Board Kit contains all the components necessary to quickly construct a variety of circuits. This Worcester Board provides the basis for clear layouts of electrical circuits and reduces the number of connecting leads required. The main component is a base board fitted with cell holders and terminal posts. 

In stock
+
Add to wish list

US$271.81

This activity set allows students to conduct activities to illustrate electromagnetism, induction and basic transformer experiments. This kit consists of a plastic base, a laminated iron core, mounting fixtures, and six coils protected in a heat resistant film. Topics covered include Lenz' Law, Faraday's Law, how iron cores increase magnetic field strength, and electromagnetic induction itself. This versatile piece of equipment can also be used to teach about how transformers used by power companies carry electrical energy.

In stock
+
Add to wish list

US$283.92
This is a hand crank Van de Graaff Generator designed for electrostatic experiments and where a continuous source of high voltage is required. This excellent quality generator consists of an aluminum collector sphere (mounted above the neoprene belt) and a sturdy base with removable terminal housing. The clear belt housing tube allows for easy viewing of the moving parts. 1000,000 volt potential.
In stock
+
Add to wish list

US$308.18
The Ripple Tank is a dual purpose vesatile tank allowing all types of waves and wave motion. Supplied in foam packing and consists of the following components: Ripple Tank 40cm x 40cm. Push fit legs. Rippler motor with eccentric cam, mounted on PVC bar. Three supports for illuminator and the motor unit. Motor hanging clamps. Springs for motor support. Lamp Unit Halogen 6 volts. Hand Stroboscope. Concave Perspex Plate. Convex Perspex Plate. Rectangular perspex Plate. Curved Reflector. Barrier Large. Barrier small. Plastic roller Bar.
In stock
+
Add to wish list

US$360.36
This is safe and steady with a quiet operation. Voltage supplied prolongs operating life. Spring-loaded, totally enshrouded tube sockets eliminate electrical shock hazard. Will accommodate a considerable variation in tube length. Lighted ON/OFF rocker switch provides convenient operation. 115V 60Hz. Output rating: 5000V without spectrum tube; 1000V @10mA with spectrum tube.
Delivery within 2-3 weeks
+
Add to wish list

US$420.42
Table top tesla coil with adjustable spark gap. Also Includes two antenna plates, small neon lightbulb, mini discharge electrode and lamp socket. This hands-free Tesla coil is used to demonstrate the unusual properties of high-frequency electrical phenomena. This electrifying device teaches about transformers, electromagnetism, resonating electrical circuits, electric inductance, capacitance, and electrical power transmission.
In stock
+
Add to wish list

US$444.99
Set Inculdes: Pulleys - (8) single, (2) double sheave, EISCO ball bearing frictionless pulleys. Wooden base 20 x 15 cm fitted with one vertical rod of size 61 cm x 12.5 mm and one horizontal rod size of 20 cm x 9.5 mm with clamp. Collars with hook - 6. Right angled clamp - 1. Wheel & axle - 1. Cord - 2 rolls. Tommy bar to tighten vertical rods - 1. Hooked Masses Brass, with hooks. 1 x 10g, 2 x 20g, 1 x 50g, 1 x 100g, 2 x 200g, 1 x 500g, 1 x 1000g - total 9 weights. Instructions.
Delivery within 2-3 weeks
+
Add to wish list

US$784.42
This advanced ripple tank from EISCO comes complete with all accessories needed for wave investigations. Tank is intensely illuminated by a strong light source, and synchronized with the wave generator to help students observe the wave patterns on a workgroup table. The frame is made of reinforced plastic and with foam beaches (to negate reflections). Set includes: (1) Vibration Generator (1) Wave monitor unit (1) Projection screen (1) Wave dippers (1) Lever arm and support (1) Ripple tank (1) Projection mirror (1) Set of footers with adjustment screws (1) Set of lucite/perspex objects.
Delivery within 2-3 weeks
+
Add to wish list

US$875.00
More advanced Spectrometer, Easy to set-up and use.Includes grating and holder, prism, illuminated magnifier, auto-collimation mirror, and detailed instruction manual. Supplied in wooden carrying case. This instrument whilst robust enough for individual student use also intended for more advanced work. Scale 150 mm diameter circle is fixed, and the table and telescope movements are completely independent of each other. Both movements can be read to 30 sec. of arc by means of double ended verniers. Both rotations have fine adjustment screws, and release of a clamping screw enables coarse adjustment to be made by hand.
Delivery within 2-3 weeks
+
Add to wish list
1 2 3 4 5 6