Creality

ABRA Electronics is an authorized distributor of Creality 3D printers in Canada.
1 2
US$907.68

The CR-6 MAX is the second printer that Creality has financed through crowdfunding.

The key difference between the CR-6 Max and the SE is, of course, the build volume. The CR-6 Max features a 400 x 400 mm build plate, with a towering 400mm build height.

Features:

  • Stability: Holding up the Z-axis are the supporting rods that Creality has previously dubbed “The Golden Triangle”. This triangular frame design helps reduce vibrations (Z-wobble). It also has a dual synchronous Y-axis that prevents the print bed from twisting while printing. The CR-6 Max is equipped with dual Z-axis motors and lead screws synchronized with a belt to deliver finer results.
  • Automatic Leveling System: The CR-6 Max 3D printer features the same innovative leveling system as the CR-6 SE, using a force-based sensor. The Max will simply touch the nozzle to the bed at specific points, and a strain sensor on the hot end will detect the exact point at which the nozzle touches the glass.
  • Modular Nozzle: Creality designed the nozzle with modularity in mind. Users can disable the nozzle and change the heater block, heat sink, teflon tube, or the nozzle tip with the included spares.
  • Dependable Extruder: The redesigned extruder should allow an easier filament feed which will ultimately generate faster, quieter, and smoother prints.
  • Filament Run-Out Sensor: The CR-6 Max 3D printer is equipped with a photoelectric filament sensor detecting any possible filament breakage or runout.
  • Resume Print Function: Outages or disconnections should be no problem for the CR-6 Max because it can fully recover and resume the print when it’s back up.
  • 32-bit Motherboard: The CR-6 Max reached one of its stretch goals on Kickstarter, meaning that both the SE and the Max are delivered with a 32-bit silent motherboard for enhanced performance.
  • TMC2209 Motor Drivers: Another stretch goal, Creality has added TMC2209 motor drivers for precise and quiet printing.
  • MeanWell Power Supply: Clarified in Creality’s latest update, the CR-6 SE and CR-6 Max will be shipped with high-quality MeanWell power supplies for extended hardware life and your peace of mind.
  • Great User Experience: 4.3" capacitive LCD touch screen with intuitive UI
In stock
+
Add to wish list

US$454.95

The new CR-6 SE comes in modules that are crafted with quality aluminum profiles. The device can be easily assembled within 5 minutes. Plug it in and switch it on, printing starts right out of the box.

CR-6 SE has a versatile modular nozzle that is quite easy for component parts replacement, saving more time and effort in nozzle maintenance. When disabling the nozzle, users can change the heat block, heat sink, Teflon tube or the nozzle tip.

The nozzle is equipped with powerful cooling fans that can dissipate the heat 30% more than the previous models. The clip-on extruder design makes the filament feed-in much easier and effortless. The redesigned extruder is capable of promoting faster and smoother filament extrusion to deliver higher quality prints. The CR-6 SE is equipped with dual Z-axes and timing belt to deliver finer results. The wider frame makes the machine more stable.

Features:

  • Bed Size: 235 x 235 x 250mm
  • Super Easy Assembly: only put a few parts together and good to go, start printing straight OUT OF THE BOX.
  • Groundbreaking Leveling-Free : (Auto 16 points leveling for the first time, no panic and troubles) ideal for everyone even beginners.
  • A Quiet Printer: 32-bit silent motherboard, ATmega2560 control chip, and 24V 350W MeanWell power supply enable the CR-6 SE to heat up quickly and reduce noise consistently.
  • Customizable, Modular Nozzle: Simplicity in nozzle maintenance. You can customize it. From the heat block to the nozzle tip, among other parts, this is a Modular 3D Printer that's easy to keep!
  • Dependable Extruder: With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter, and smoother prints.
  • Great User Experience: 4.3" HD LCD Touch Screen with intuitive UX UI, Photoelectric Filament Sensor, and Resume printing function, More Practical Add-ons: Flexible hotbed fixator, foldable filament holder, stepper motor cover, tool boxes... All you need is within reach.
In stock
+
Add to wish list

US$453.86

An exquisite 3D printer is always with high performance. Not only does the Creality CR-200B 3D printer have the best features, but it also has a really smart, elegant design.

Features:

  • Minimalist Industrial Design
  • Your print is visible: The printer features an internal LED light for when the printing is done in a dark environment.
  • Transparent Viewing Chamber: The exclusive structure with classical Creality color and multi-style optional realizes your endless creativity.
  • Fully Enclosed Design: The enclosed chamber with 200 x 200 x 200mm build volume helps you print higher grade filaments.
  • High Performance Hot End: Redesigned hot end kit with excellent thermal conductance features wear-resistance, stability and smooth printing. The dual fan design provides a great heat dissipation.
  • Filament Run-Out Sensor: Whenever there is a possible run-out or filament breakage, this sensor forces the machine to pause printing. Printing will automatically resume after the new filament is fed into the extruder.
  • Great User Experience: 4.3" capacitive LCD touch screen with intuitive UI
In stock
+
Add to wish list

US$450.22

New updated Ender-3 S1 3D-Printer: what’s new?

  • Bed Size: 220 x 220 x 270mm
  • Updated mainboard with silent stepper drivers:  Compared to the Ender 3 and Ender 3 Pro, an S1 design that delivers users out-of-the-box experience and silence-oriented upgrades(quieter 3D printers).
  • New UI & 4.3 Inch Color Screen: With a 4.3-inch color screen and a redesigned UI that prioritizes ease of use, the Ender-3 V2 is an ideal choice for beginners.
  • Easier Maintenance: Pre-installed X and Y-Axis belt tension make it even easier to keep your machine printing at its best. Easily adjust belt tension to maintain accuracy performance.
  • Sprite Direct Dual-Gear Extruder: The "Sprite" is lighter and features less inertia and more precise positioning, supports PLA/TPU/PETG/ABS print filaments.
  • Auto Leveling: Creality CR Touch is a reliable tool with a metallic probe that helps you keep the print bed levelled.
  • PC Magnetic Build Plate: Combined with the advantage of PC Spring Steel and Magnetic Sticker for the better bed adhesion and good experience for model released.
  • Z-Axis Dual-Screw + Z-Axis Dual-Motor Design: Compared to Ender-3, Ender-3V2, Ender-3Max, Ender 3S1 has upgraded to the dual screw and motor setup.
  • New Z-Axis Design: Adds stability to the X-axis gantry to improve printing quality and reduce the wear on the mechanical components
In stock
+
Add to wish list

US$113.52

This multifunctional enclosure is made of wear resistant, fire and flame retardant material. It provides a good insulation effect for printing with sensitive material including ABS, ASA, PC, Nylon and even PETG. It will trap the heat inside and around the printer to prevent your object from warping.

In stock
+
Add to wish list

US$109.15

Protect your 3D printing filaments from absorbing moisture from the air using this Creality Dry Box. Filaments absorb humidity when they sit in unsealed enclosures. As a result, the filament becomes brittle and will cause failed prints and nozzle clogs. Simply insert your 1KG spool and turn the dryer on for 2/4/8 Hours. The dry box also dispenses the filament to the 3D printer, so you can print at the same time.

In stock
+
Add to wish list

US$81.85

This is a genuine upgrade part for your Creality 3D printers with a single Z-axis motor. The TMC2225 silent drivers make printing at home/workshop a breeze. It is preloaded with Ender 3 firmware but can be easily reflashed with your desired firmware. SD card is not included.

Note: Firmware can be found in the "Attachments" tab.

  • Creality V4.2.7 motherboard is an excellent upgrade for the factory installed V1.1.4 board
  • It has a USB port for monitoring as well as controlling the E/Z/Y/X using a PC
  • It has ports for auto leveling as well as filament run-out detector
  • The integrated stepper motor drivers have heatsinks for better cooling
  • Input voltage is 24VDC
  • Silent TMC2225 drivers
In stock
+
Add to wish list

US$81.67
CR Touch is a self-developed 3D printer platform leveling solution developed by Creality. It is upgraded with a metal probe, which reduces wear and tear and greatly prolongs its service life.
In stock
+
Add to wish list

US$58.92
Level up your 3D printing capabilities by adding a camera to your Creality Wi-Fi Box. You can watch your Creality printer live from anywhere using the...
In stock
+
Add to wish list

US$45.45

Enhance your User Interface (UI) experience by upgrading your Ender 3 with this touchscreen display kit. Super easy to install, quick setup, and easy to use. Only compatible with Creality Ender 3 3D Printer. Innovative UI interface brings you an incredibly interactive experience, totally different from the standard knob and graphic display.

In stock
+
Add to wish list

US$40.90
This is a genuine replacement part for your Creality Ender-3 3D printer. It features the same distance between the mounting holes and includes the stock marlin firmware that is included in the Ender-3.
In stock
+
Add to wish list

US$27.25

Level up your 3D printing capability by using this Creality Wi-Fi Box. Simply connect your Creality 3D printer to the USB port on the Wi-Fi Box, start slicing and printing on the Creality Cloud App.

In stock
+
Add to wish list

US$27.07
The following is a MK-HF stainless steel nozzle kit compatible with CR-6 SE/Ender-3 series/Ender-5 series/Ender-6/CR-10/CR-10S/CR-10 Mini/CR-10 Max/CR-10 V2/CR-10 V3/CR-10 Smart/CR-200B/CR-5060 Pro/CR-5 Pro-H.
In stock
+
Add to wish list

US$24.95
This is a 1.75mm diameter filament with a density of 1.3 g/cm^3. The spool weighs 1KG. The material of the filament is PLA and will melt from temperatures ranging from 180 to 220°C.
In stock
+
Add to wish list

US$24.95
This is a 1.75mm diameter filament with a density of 1.3 g/cm^3. The spool weighs 1KG. The material of the filament is PLA and will melt from temperatures ranging from 180 to 220°C.
In stock
+
Add to wish list
1 2