Product filters Product filters

Connector Housing

How to Make your Own Custom Jumper Wires

Make your own custom jumper wires that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards.

You can also easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other.
Steps and Components Required:
Step 1: Pick your connector housing. We have connector housing from 1x1 to 2x16. The most popular is the 25 pack 1x1, part# 1900-POLOLU.
Step 2: Pick your female crimp pins (1930-POLOLU) or male crimp pins (1931-POLOLU).
Step 3: Choose the color and length of your stranded hook-up wire. The part number for a 100 ft. roll is 24HST100-X ("X" is the color number, for example, 24HST100-2 is black) and for a 1000 ft. roll is 24HST1000-X. 
Step 4: Finally you need a crimp tool that can crimp male and female pins. See part#: 1928-POLOLU.

 

Item # Pins A (mm) B (mm)
1900-POLOLU 1x1 - 2.54
1901-POLOLU 1x2 2.54 5.08
1902-POLOLU 1x3 5.08 7.62
1903-POLOLU 1x4 7.62 10.16
1904-POLOLU 1x5 10.16 12.70
1905-POLOLU 1x6 12.70 15.24
1906-POLOLU 1x7 15.24 17.78
1907-POLOLU 1x8 17.78 20.32
1908-POLOLU 1x9 20.32 22.86
1909-POLOLU 1x10 22.86 25.40
1919-POLOLU 1x12 27.94 30.48
1920-POLOLU 1x16 38.10 40.64
1910-POLOLU 2x2 2.54 5.08
1911-POLOLU 2x3 5.08 7.62
1912-POLOLU 2x4 7.62 10.16
1913-POLOLU 2x5 10.16 12.70
1914-POLOLU 2x6 12.70 15.24
1915-POLOLU 2x7 15.24 17.78
1916-POLOLU 2x8 17.78 20.32
1917-POLOLU 2x10 22.86 25.40
1918-POLOLU 2x16 38.10 40.64