Specifications: 40,000VDC or 20,000Vac Max input voltage. X1000 Attenuation. 1000M ohms Input Impedance. 60Hz Bandwidth. 48" (1.2m) Cable Length.
Features: Frequency is selectable from 1 Hz to 5 MHz. Sine, square, or triangle waveform output. Direct digital synthesis (DDS) architecture. Bright, easy-to-read LED display. Number pad for quick input of frequency. Front panel push button and pull knob can attenuate output by up to 40 dB Adjustable duty cycle and DC offset.
The BK Precision 1670A is a triple output power supply with front panel settable resolution of 100 mV/10 mA on the main variable 0 to 30 VDC/3 A output and a fixed 12 VDC and a 5 VDC output. Features: One variable 0 to 30 VDC, 0 to 3 A variable section. One 12 VDC fixed section. One 5 VDC fixed section. Ideal for general electronic servicing, school electronics labs, and powering up hobbyist's projects.
This is a triple output power supply with front panel settable resolution of 100 mV/10 mA on the main variable 0 to 30 VDC/5 A output and a fixed 12 VDC and a 5 VDC output. Features: One variable 0 to 30 VDC, 0 to 5 A variable section. One 12 VDC fixed section. One 5 VDC fixed section. Ideal for general electronic servicing, school electronics labs, and powering up hobbyist's projects.
This is a triple output power supply with front panel settable resolution of 10 mV/1 mA. Features: Two 0 to 30 VDC, 2 A sections capable of independent, series or parallel operation. One 4 to 6.5 VDC, 5 A section. Switchable series/parallel operation (30 V sections). Adjustable current limit controls (30 V sections). Two 4 digit LED displays, one reads volts or amps of "B" supply, one reads volts or amps of "A" supply or 4 to 6.5V supply. Unique variable tracking, B track A at 5% to 100%.
The BK Precision 890C is a handheld ranging capacitance meter that measures to 11,000-Count with Dual-Display . The 890C Capacitance Meter is a compact capacitance meter, designed for accurate measurement of capacitive components; will measure capacitance by applying a constant current that briefly charges , then discharges the connected capacitor.
This BK Precision handy capacitance meter (0.1 pF to 20 mF) and ohm meter (0.1 ohm to 20M ohm) also tests: transistors, beta, diodes, SCRs, LEDs and batteries. Features: 3 1/2 digit extra large (0.8'' digit) high contrast LCD display. Transistor leakage test. Capacitance zero adjustment. Diode and SCR test. LED test. Battery test. 5 foot drop-proof heavy duty case.
The BK Precision 1666 bench power supplies have both coarse and fine voltage and current control knobs and dual LED displays to continuously monitor both output current down to 10 mA and voltage down to 10 mV. The 1666 Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. Features: Over voltage protection. Constant voltage operation. Constant current operation (current limiting). Easy-to-use. Bright easy to read LED displays.
The BK Precision 1667 bench power supplies have both coarse and fine voltage and current control knobs and dual LED displays to continuously monitor both output current down to 10 mA and voltage down to 10 mV. The 1667 Switching DC Power Supply uses new switching technologies to offer more power at a lower cost than traditional linear power supplies. Features: Over voltage protection. Constant voltage operation. Constant current operation (current limiting). Easy-to-use. Bright easy to read LED displays.
The 1604A BK Single Output Isolation Transformer isolates or decouples the output from input mains up to 1.25 A continuous. Use this model for safe testing of transformerless equipment. Leakage: less than 0.1 mA. Output Voltage: 117 to 124 V nominal (120 V input). Output Current: 1.25 A continuous.
Because this meter was designed to measure smaller amounts of current it is ideal for quick non-intrusive current measurements. Features: Auto power off. 4 Digit LCD display. Low battery indicator. 0.49" Clamp opening. Overload protection. AC/DC Amp ranges 10A, 80A & 100A. 1mA (10A range) & 10mA resolution. Measures current between 5% to 100% full scale. Measures AC/DC Volts to 600V. Measures resistance to 10K ohms. One year warranty.
The BK Precision 1745A (0-35V, 0-10A, Digital DC Power Supply) bench power supplies have both coarse and fine voltage and current control knobs and dual LED displays to continuously monitor both output current down to 1 mA and voltage down to 10 mV. B+K Precision model 1745A is a 0 to 35V, 0 to 10A DC Power Supply. This power supply has all of the great features and performance you would expect from a B+K Precision power supply. One of these features is the four digit LED disply that allows you to see 10mV and 1mA resolution. Another great feature is the output shorting button that allows the user to short the output terminals to set the current limit.
