Our Brands

Adafruit

1 2 3 4 5 6 7 8
2 - 16
Newest Items First
32 Per Page
5912-ADA Adafruit SHT41 Trinkey - USB Temperature and Humidity Sensor
US$17.06
5912-ADA  Adafruit SHT41 Trinkey - USB Temperature and Humidity Sensor It's half USB Key, half temperature-humidity sensor, which is a PCB made to...
In stock
+ −
Add to wish list
5896-ADA Adafruit SHT45 Trinkey - USB Temperature and Humidity Sensor
US$27.25
5896-ADA Adafruit SHT45 Trinkey - USB Temperature and Humidity Sensor It's half USB Key, half temperature-humidity sensor, which is a PCB made to...
In stock
+ −
Add to wish list
5723-ADA Adafruit Feather RP2040 with USB Type A Host
US$29.95
The Adafruit Feather RP2040 with USB Host is definitely double-the-fun of our other Feather RP2040 boards, with a USB Type A port on the end for connecting USB devices to.
Delivery within 2-3 weeks
+ −
Add to wish list
4538-ADA NAU7802 Bridge Gauge Sensor Load Cell Module 24-Bit ADC - STEMMA QT/Qwiic
US$9.78
4538-ADA NAU7802 Bridge Gauge Sensor Load Cell Module 24-Bit ADC - STEMMA QT/Qwiic
In stock
+ −
Add to wish list
5880-ADA I2C STEMMA QT / Qwiic Rotary Encoder Breakout with Encoder
US$12.69
5880-ADA I2C STEMMA QT / Qwiic Rotary Encoder Breakout with Encoder
In stock
+ −
Add to wish list
5879-ADA UPDI Friend - USB Serial UPDI Programmer
US$10.87

This module is designed to make programming modern ATtiny chips very easy because it has 3V or 5V power and logic select, power and transmit indicator LEDs, and a quick cable for poking into a breadboard.

Delivery within 2-3 weeks
+ −
Add to wish list
5877-ADA CAN Bus BFF Add-On Module for QT Py
US$14.51
5877-ADA CAN Bus BFF Add-On Module for QT Py
In stock
+ −
Add to wish list
5710-ADA Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
US$25.43
Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
In stock
+ −
Add to wish list
3898-ADA Lithium Ion Polymer Battery Ideal For Feathers - 3.7V 400mAh
US$11.78
The batteries come pre-attached with a genuine 2-pin 25mm long JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable won't snag or get stuck in a matching JST jack, they click in and out smoothly.
Delivery within 2-3 weeks
+ −
Add to wish list
1196-ADA Slip Ring with Flange - 22mm diameter, 12 wires, max 240V @ 2A
US$31.62
With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the plastic tube is a gold plated slip ring for 12 wires. There are 12 color coded wire sets made of 28 AWG and no matter how you twist the assembly, they will remain in continuity.
Delivery within 2-3 weeks
+ −
Add to wish list
956-ADA Miniature 8x8 Blue LED Matrix, Common Cathode
US$9.05
Miniature 8x8 Blue LED Matrix, Common Cathode   You will squeal with delight when you hold this adorable miniature LED matrix. 0.8" square, its got...
In stock
+ −
Add to wish list
4907-ADA USB C SMT / THM Jack Connector - Power Only - Pack of 10
US$4.32
If you're a DIY enthusiast who'd like to update your power only project's connection to the latest USB standard, here is a 10-pack of USB C power only jack connectors! They're sturdy metal with 4 through-hole mounting tabs. It's really hard to rip these off a PCB. In an SMT line, you can just paste over the through-hole slots, and the pads will solder in place.
In stock
+ −
Add to wish list
4909-ADA 40-pin FPC to Right Angle 2x20 IDC Female Socket Header
US$5.41
This is a 40-pin FPC to Right Angle 2x20 IDC Female Socket Header Adapter. Use this adapter, which will act as an extender for all 40 pins to give you a streeeeetch. Simply plug the socket side into the Raspberry Pi. Then, keeping an eye where Pin 1 is, insert your FPC ribbon cable into the 40-pin flex connector.
Delivery within 2-3 weeks
+ −
Add to wish list
4905-ADA 40-pin FPC to Straight 2x20 IDC Female Socket Header
US$5.41
This is a 40-pin FPC to Straight 2x20 IDC Female Socket Header Adapter. Use this adapter, which will act as an extender for all 40 pins to give you a streeeeetch. Simply plug the socket side into the Raspberry Pi. Then, keeping an eye where Pin 1 is, insert your FPC ribbon cable into the 40-pin flex connector.
In stock
+ −
Add to wish list
3244-ADA Mini 3-Layer Round Robot Chassis Kit - 2WD with DC Motors
US$38.90
This kit gives you everything you need to build the shell of a 2-wheel-drive Mobile Platform Robot! You get the metal plates that make up the chassis, two DC drive motors with matching wheels, and a caster ball for balance. You'll fill in the rest with a power supply, microcontroller board, and motor controller. The differential drive (two separately driven wheels) allows for a near zero turning radius while the high-strength aluminum alloy body plus high-quality high-speed motors make it suitable for flat indoor surfaces.
Delivery within 2-3 weeks
+ −
Add to wish list
5753-ADA Adafruit PC Joystick to seesaw I2C Adapter - STEMMA QT / Qwiic
US$9.05
This board has a 15 pin D-Sub socket port, that you can plug any classic PC joystick into. Onboard is a ATtiny816 helper chip that acts as a I2C peripheral using our 'seesaw' library. Two STEMMA QT ports mean you can plug this board in using a 4-pin JST SH cable to any microcontroller or microcomputer with I2C support and read the joystick X & Y plus the two buttons, even if your main chip doesn't have analog inputs. There's even a 5V power generator on-board since joysticks are expecting that voltage.
In stock
+ −
Add to wish list
5786-ADA Adafruit Metro RP2040
US$22.70
The RP2040 is a powerful chip, which has the clock speed of our M4 (SAMD51), and two cores that are equivalent to our M0 (SAMD21). Since it is an M0 chip, it does not have a floating point unit or DSP hardware support - so if you're doing something with heavy floating-point math, it will be done in software and thus not as fast as an M4. For many other computational tasks, you'll get close-to-M4 speeds!
In stock
+ −
Add to wish list
4470-ADA Adafruit MCP4728 Quad DAC with EEPROM - STEMMA QT / Qwiic
US$11.78
The MCP4728 lets you chose between two sources for your reference voltage: the input voltage that you use to power it on the VCC pin, or an internal 2.048V reference voltage. If you use the internal reference voltage (Vref in DAC speak) you can choose between 1X or 2X gain for the output, allowing your voltages to range from 0V to 2.048 or 0V to 4.096V as your application requires.
In stock
+ −
Add to wish list
4900-ADA Adafruit QT Py RP2040
US$15.42
The star of the QT Py is our favorite connector - the STEMMA QT, a chainable I2C port that can be used with any of our STEMMA QT sensors and accessories. Having this connector means you don't need to do any soldering to get started. What can you pop into the QT port? How about OLEDs! Inertial Measurment Units! Sensors a-plenty. All plug-and-play thanks to the innovative chainable design: SparkFun Qwiic-compatible STEMMA QT connectors for the I2C bus so you don't even need to solder. Just plug in a compatible cable and attach it to your MCU of choice, and you’re ready to load up some software and measure some light.
Delivery within 2-3 weeks
+ −
Add to wish list
BB-RCA-M-SP RCA Male Jack to Terminal Block Spring-Loaded
US$1.77
RCA Male Jack to spring-load Terminal Block for video and audio applications.
Delivery within 2-3 weeks
+ −
Add to wish list
4055-ADA Snap-In Panel Mount Cable - USB A Extension Cable
US$8.87
This panel mount cable will allow you to enclose a device that has a USB A port. Perfect for placing your project in a secure box. Both ends have standard USB A, an extension cord if you will.
In stock
+ −
Add to wish list
4259-ADA USB C Jack to USB A Jack Round Panel Mount Adapter
US$9.96
If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project.
In stock
+ −
Add to wish list
SENS-AM2302 Temperature-Humidity Capacitance DHT22 Sensor
US$12.69
SENS-AM2302 Temperature-Humidity Capacitance DHT22 Sensor .
It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and sends out a digital signal on the data pin.
In stock
+ −
Add to wish list
SEN0539-EN Gravity: Offline Language Learning Voice Recognition Sensor for Arduino / Raspberry Pi / Python / ESP32 - I2C & UART
US$27.07
This Gravity: Offline Voice Recognition Sensor is built around an offline voice recognition chip, which can be directly used without an internet connection. It comes with 121 built-in fixed command words and supports the addition of 17 custom command words. Any sound could be trained as a command, such as whistling, snapping, or even cat meows, which brings great flexibility to interactive audio projects.
In stock
+ −
Add to wish list
ARD-MAX7219-GN, Small Green 1.2" 8x8 LED Matrix with MAX7219 Module
US$5.41
Small Green 1.2" 8x8 LED Matrix with MAX7219 Module The MAX7219 is compact, serial input/output common-cathode display drivers that interface...
In stock
+ −
Add to wish list
3857-ADA Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4
US$36.35
This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset.
In stock
+ −
Add to wish list
5637-ADA Adafruit QT 5V to 3V Level Shifter Breakout - STEMMA QT / Qwiic
US$5.14
The STEMMA QT connectors on either side are compatible with the I2C connectors. This allows you to make solderless connections between your development board and the QT Shifter or to chain it with a wide range of other sensors and accessories using a compatible cable.
Delivery within 2-3 weeks
+ −
Add to wish list
4210-ADA STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long
US$2.23
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In stock
+ −
Add to wish list
5046-ADA Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT
US$31.62
The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price! The BME688 is a 'drop in' replacement for the BME680 - it adds a method of programming the gas-sensor heater for controlled odor-analysis but is otherwise the same hardware.
In stock
+ −
Add to wish list
5300-ADA Adafruit ESP32-S2 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
US$38.90
This feather comes with native USB and 4 MB flash + 2 MB of PSRAM, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.
Delivery within 2-3 weeks
+ −
Add to wish list
5591-ADA Adafruit LTR-329 Light Sensor - STEMMA QT / Qwiic
US$7.23
The Adafruit LTR-329 Light Sensor a simple and popular low-cost I2C digital light sensor that is easy to integrate into your project for reliable and wide-ranging light measurements.
In stock
+ −
Add to wish list
5610-ADA Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
US$7.23
The Adafruit LTR-303 Light Sensor a simple and popular low-cost I2C digital light sensor that is easy to integrate into your project for reliable and wide-ranging light measurements.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8
2 - 16