Our Brands

Adafruit

1 2 3 4 5 6 7 8
2 - 16
Sort by Price: High to Low
15 Per Page
1751-ADA LG LP097QX1 - iPad 3/4 Retina Display
1751-ADA LG LP097QX1 - iPad 3/4 Retina Display
US$174.92
These are the same glorious 2048x1536 retina-blasting, ultra-high pixel density, IPS displays you may have seen in iPad 3 or 4's. This product comes with only the brand new 9.7" diagonal TFT display module, no driver thunderbolt connector!
In stock
+ −
Add to wish list
204 MONOCHRON Clock kit - Open source clock platform, make clocks! - v1.0
204 MONOCHRON Clock kit - Open source clock platform, make clocks! - v1.0
US$140.00

This clock kit is a open source platform for designing clock display and others. MONOCHRON® is a new clock kit from Adafruit! This easy kit is easily hackable to do whatever you wish, it's a clock platform - have fun! 128x64 LCD (KS0108) - we special-ordered the black and white display!

In stock
+ −
Add to wish list
1090 FLORA GPS Starter Pack
1090 FLORA GPS Starter Pack
US$138.53
Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the Flora, and some parts to make a wearable remote control (or TV-B-Gone!): NPN transistors, long range IR LEDs, and matching resistors.
In stock
+ −
Add to wish list
636-ADA USB Microscope - 5MP interpolated 220x magnification / 8 LEDs
US$123.13
As electronics get smaller and smaller, you'll need a hand examining PCBs and this little USB microscope is the perfect tool. Its smaller and lighter than a large optical microscope but packs quite a bit of power in its little body. There's a 5.0 megapixel sensor inside and an optical magnifier that can adjust from 20x (for basic PCB inspection) to 220x (for detailed inspection). Eight white LEDs are angled right onto whatever you're examining so you get enough lighting to see, and are smoothly adjustable via a dial on the side. New! We've upgraded this microscope to 5.0 Megapixel (from 2.0M) and this one comes with two removable plastic caps to get close ups for a wider focusing range.
Delivery within 2-3 weeks
+ −
Add to wish list
461 Adalight - DIY Ambient Monitor Lighting Project Pack
461 Adalight - DIY Ambient Monitor Lighting Project Pack
US$87.42

Build your own ambient-light addition for a monitor or media PC television with the Adalight project pack!. By running the Processing code on your computer, the halo of LEDs will follow the screen colors to provide an awesome ambient light display that adds pop to TV shows, movies or games! Works using open source Processing and Arduino - so it'll run on Mac, Windows or Linux computers!

In stock
+ −
Add to wish list
241 USB game pad with accelerometer project pack
241 USB game pad with accelerometer project pack
US$78.75

Build a custom USB gamepad that has an accelerometer mouse inside! This project pack comes with: SNES controller, Teensy, Accelerometer, 5' mini-B USB cable, 8" of ribbon cable, 2 squares of foam tape. 

In stock
+ −
Add to wish list
1240 SMT Test Socket - TQFP-32 Breakout
1240 SMT Test Socket - TQFP-32 Breakout
US$78.67
You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in TQFP-32 packages. This test sockets is good for any QFP-32 in a 7mm square body. Simply open the latch, place the chip in carefully and then close the top over it. The chip is held securely against gold 'fingers' in the socket.
In stock
+ −
Add to wish list
1733-ADA Anemometer Wind Speed Sensor w/Analog Voltage Output
1733-ADA Anemometer Wind Speed Sensor w/Analog Voltage Output
US$78.67
This well made anemometer is designed to sit outside and measure wind speed with ease. To use, connect the black wire to power and signal ground, the brown wire to 7-24VDC (we used 9V with success) and measure the analog voltage on the blue wire. The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind speed).
In stock
+ −
Add to wish list
1983-ADA PiTFT Mini Kit - 320x240 2.8" TFT+ Capacitive Touchscreen
US$78.67
Featuring a 2.8" display with 320x240 16-bit color pixels and a single-touch capacitive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
In stock
+ −
Add to wish list
464-ADA 12" eTape Liquid Level Sensor + extras
464-ADA 12" eTape Liquid Level Sensor + extras
US$75.17
The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats, and easily interfaces with electronic control systems. The eTape sensor's envelope is compressed by the hydrostatic pressure of the fluid in which it is immersed.
In stock
+ −
Add to wish list
1558-ADA Breadboard-friendly RGB Smart NeoPixel - Sheet of 25
1558-ADA Breadboard-friendly RGB Smart NeoPixel - Sheet of 25
US$69.92
This is the easiest way possible to add small, bright RGB pixels to your project. We took the same technology from our Flora NeoPixels and made them breadboard friendly, with two rows of 3 x 0.1" spaced header on each side for easy soldering, chaining and breadboarding. These ultra-bright LEDs have a constant-current driver cooked right into the LED package!
In stock
+ −
Add to wish list
PiTFT Plus 480x320 3.5" TFT+Touchscreen for Raspberry Pi
US$69.30
It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer "2x20 connector" Raspberry Pi's. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
Delivery within 2-3 weeks
+ −
Add to wish list
353 Lithium Ion Battery Pack - 3.7V 6600mAh
353-ADA Lithium Ion Battery Pack - 3.7V 6600mAh
US$69.13
Need a massive battery for your project? This lithium ion pack is made of 3 balanced 2200mAh cells for a total of 6600mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provides over-voltage, under-voltage and over-current protection.
In stock
+ −
Add to wish list
789-ADA Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
789-ADA Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
US$61.52
We've taken our popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. While the controller has many capabilities, our Arduino library currently only supports reading/writing tags, and does not support phone-to-shield communication, tag emulation (which requires an external 'secure element' only available from NXP) or other more advanced features at this time.
Delivery within 2-3 weeks
+ −
Add to wish list
746-ADA Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3
US$61.52
It's got everything you want and more: -165 dBm sensitivity, 10 Hz updates, 66 channels. 5V friendly design and only 20mA current draw. Breadboard friendly + two mounting holes. RTC battery-compatible. Built-in datalogging. PPS output on fix. Internal patch antenna + u.FL connector for external active antenna. Fix status LED. New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output.
In stock
+ −
Add to wish list
1 2 3 4 5 6 7 8
2 - 16