Our Brands

Adafruit

1 - 8
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
10 - 24
Sort by Price: Low to High
15 Per Page
3431-ADA Mini LED Arcade Button - 24mm Translucent Yellow
US$4.24
The buttons screw in place, so you can use with up to ~15mm thick material, and will cover up if the hole if it isn't perfectly round and clean. The action is smooth, without a strong click, yet you can definitely feel when the button is pressed. A tiny micro-switch is pre-installed, with gold plated contacts.
Delivery within 2-3 weeks
+ −
Add to wish list
4907-ADA USB C SMT / THM Jack Connector - Power Only - Pack of 10
US$4.32
If you're a DIY enthusiast who'd like to update your power only project's connection to the latest USB standard, here is a 10-pack of USB C power only jack connectors! They're sturdy metal with 4 through-hole mounting tabs. It's really hard to rip these off a PCB. In an SMT line, you can just paste over the through-hole slots, and the pads will solder in place.
In stock
+ −
Add to wish list
402 In-line wire 1-to-4 splitter
402 In-line wire 1-to-4 splitter
US$4.35

This is an in-line wire one to four way splitter, where you can have multiple EL wires connected.

In stock
+ −
Add to wish list
411 2.1mm to 1.7mm DC jack adapter
411 2.1mm to 1.7mm DC jack adapter
US$4.38

We're carrying this adapter primarily to allow Chumby Hacker Board users to adapt our nice 5V @ 2A power supply to their CHB. But you can use this adapter for anything else that has a 1.7mm DC jack, such as a PSP.

In stock
+ −
Add to wish list
744 Waterproof Polarized 4-Wire Cable Set
744 Waterproof Polarized 4-Wire Cable Set
US$4.38
We now have very useful 4-wire polarized cable sets in a waterproof variety. These cable sets are ideal for projects that must weather the weather: dust, water, rain, snow, tornado (not volcano proof!).
In stock
+ −
Add to wish list
360 MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB
360 MiFare Classic (13.56MHz RFID/NFC) White Tag - 1KB
US$4.38
This is a blank MiFare Classic 'laundry' tag - often used for laundry or identification but also found in other systems where a small proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
In stock
+ −
Add to wish list
677 Terminal block - 4 pin Euro-Style
677 Terminal block - 4 pin Euro-Style
US$4.38
They allow connecting of two sets of four wires together using just a flat-head screwdriver.
In stock
+ −
Add to wish list
2223-ADA GPIO Header for Raspberry Pi B+ - Extra-long 2x20 Female Header
US$4.38
Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.
In stock
+ −
Add to wish list
2793-ADA RCA (Composite Video, Audio) Female Jack Terminal Block
US$4.38
One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs.
In stock
+ −
Add to wish list
2308-ADA 2.4GHz Mini Flexible WiFi Antenna with uFL Connector - 100mm
US$4.38
This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as the Adafruit CC3000s! Antenna comes with a uFL (a.k.a u.FL / IPX / IPEX) connector, so no more need for additional adapters to get your IoT cloud flying high!
Delivery within 2-3 weeks
+ −
Add to wish list
1125 In-line power switch for 2.1mm barrel jack
1125 In-line power switch for 2.1mm barrel jack
US$4.50
Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.
In stock
+ −
Add to wish list
2743-ADA SWD (2x5 1.27mm) Cable Breakout Board
US$4.50
This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.
In stock
+ −
Add to wish list
5383-ADA, Single Li-Ion and LiPoly Battery Power Meter
US$4.50
The 5383-ADA is a small Li-po and Li-ion battery meter. It has a very simplistic design and is easy to install on any battery.
In stock
+ −
Add to wish list
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6" long
US$4.54
Unlike the 'classic' Raspberry Pi computers, you can't really stick a HAT, bonnet, pHAT or other accessory/add-on on top...what to do? Give up!? NO! Use this cable, which will act as an extender for all 40 pins to give you a stretch of about 150mm / 6 inches. Simply plug the socket side into the Raspberry Pi with the white mark next to the Pin 1 label. Then on the other side, plug the hat down onto the plug side.
In stock
+ −
Add to wish list
3287-ADA 3 x AA Battery Holder with On/Off Switch, JST, and Belt Clip
US$4.55
This battery holder connects 3 AA batteries together in series for powering all kinds of projects. We spec'd these out because the box is compact, and 3 AA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries, plus it has a nifty on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of our Li-Ion/Poly batteries. (Of course, you can't recharge them like Li-Ion/Polys, so don't try to plug this into one of our Li-Ion/Poly charger boards!). It also features an ergonomic belt clip for taking your power on the go!
In stock
+ −
Add to wish list
1 - 8
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
10 - 24