Our Brands

Adafruit

10 - 24
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
26 - 40
Sort by Popularity
15 Per Page
414 Electroluminescent (EL) Panel - 20cm x 15cm Aqua
414 Electroluminescent (EL) Panel - 20cm x 15cm Aqua
US$61.17
Measures 20 cm x 15 cm (7.9" x 5.9"), about 0.5mm thick. Its covered in what seems to be PVC, the panel is thus spill proof - but note that the connector is NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods.
In stock
+ −
Add to wish list
410-ADA High Brightness White Electroluminescent (EL) Wire - 2.5 meters
410-ADA High Brightness White Electroluminescent (EL) Wire - 2.5 meters
US$21.00
We've got 2.6mm thickness EL wire, with a pinkish coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 115 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use.
In stock
+ −
Add to wish list
1188-ADA Massive Arcade Button with LED - 100mm Green
1188-ADA Massive Arcade Button with LED - 100mm Green
US$17.42
This button has a domed green plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly.
In stock
+ −
Add to wish list
1647-ADA Flex Cable for Raspberry Pi Camera - 200mm / 8"
1647-ADA Flex Cable for Raspberry Pi Camera - 200mm / 8"
US$3.42
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. 
Delivery within 2-3 weeks
+ −
Add to wish list
1858-ADA Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
1858-ADA Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
US$9.87
This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device.
In stock
+ −
Add to wish list
314 Clear 'Piranha' Super-flux RGB (tri-color) LED - Common Anode
314 Clear 'Piranha' Super-flux RGB (tri-color) LED - Common Anode
US$3.50
Clear 5mm tri-color LEDs with separate red, green and blue LED chips inside!
Delivery within 2-3 weeks
+ −
Add to wish list
591 Adafruit Perma-Proto Super Pack!
591 Adafruit Perma-Proto Super Pack!
US$61.17
Pick up a super pack of our Perma-Proto PCBs, perfect for professional prototyping projects! This super pack contains 3 each of our 3 sizes - 9 PCBs total. You'll always have the right size for whatever you're working on.
In stock
+ −
Add to wish list
2890-ADA FeatherWing Doubler - Prototyping Add-on For All Feather Boards
US$13.13
This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto (2884-ADA) except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards simultaneously side-by-side!
In stock
+ −
Add to wish list
861 Miniature 8x8 Green LED Matrix - BL-M07C881UG-11
861 Miniature 8x8 Green LED Matrix - BL-M07C881UG-11
US$6.92
There are 16 pins on the side, 8 on each, with 0.1" spacing so you can easily plug it into a breadboard with plenty of space to wire it up.
In stock
+ −
Add to wish list
880 Adafruit 0.56" 4-Digit 7-Segment Display w/I2C Backpack - Green
880 Adafruit 0.56" 4-Digit 7-Segment Display w/I2C Backpack - Green
US$17.42

The product kit comes with: A fully tested and assembled LED backpack. Ultra-bright 4-digit 0.56" tall green seven-segment display. 4-pin header. A bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes. 

In stock
+ −
Add to wish list
1194-ADA Large Arcade Button with LED - 60mm Blue
1194-ADA Large Arcade Button with LED - 60mm Blue
US$11.46
This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. 
In stock
+ −
Add to wish list
1192-ADA Large Arcade Button with LED - 60mm White
1192-ADA Large Arcade Button with LED - 60mm White
US$11.46
This button has a flat white plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the shallow depth of the button, it doesn't illuminate the entire button face evenly.
In stock
+ −
Add to wish list
1907-ADA Dual Alphanumeric Display - Red 0.54" Digit Height - Pack of 2
1907-ADA Dual Alphanumeric Display - Red 0.54" Digit Height - Pack of 2
US$5.45
This is a nice, bright 14-segment alphanumeric display that can show letters and numbers in a beautiful red hue.
In stock
+ −
Add to wish list
1471-ADA Large Tin With Clear Top Window
1471-ADA Large Tin With Clear Top Window
US$8.67
This tin is about 3.5" by 5.5" so it's got plenty of space for an Arduino Uno or Mega, or Raspberry Pi, or Beagle Bone, or really any dev board you could think of. The tin is sturdy but easy to punch holes in or cut with tin snips.
In stock
+ −
Add to wish list
1131 JST-PH Battery Extension Cable - 500mm
1131 JST-PH Battery Extension Cable - 500mm
US$3.42
By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire.
In stock
+ −
Add to wish list
10 - 24
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
26 - 40