Our Brands

Adafruit

1 - 15
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
17 - 31
Newest Items First
15 Per Page
2743-ADA SWD (2x5 1.27mm) Cable Breakout Board
US$4.50
This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming.
In stock
+ −
Add to wish list
2716-ADA Adafruit Silicon MEMS Microphone Breakout - SPW2430
US$8.67
This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. To keep the breakout small and simple, we only added a 3V voltage regulator (the microphone requires 3.3V DC) and filter capacitors.
Delivery within 2-3 weeks
+ −
Add to wish list
2717-ADA TCA9548A I2C Multiplexer
US$12.17
Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set of I2C pins with your command.
In stock
+ −
Add to wish list
2652-ADA Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
US$25.82
This precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with  ±1 meter or better accuracy!
In stock
+ −
Add to wish list
2460-ADA Passive GPS Antenna uFL - 9mm x 9mm -2dBi gain
US$8.67

Wow that's a tiny GPS antenna! This passive antenna is only 9mm x 9mm x 6.5mm in size, with a 50mm long uFL cable. Great for when you want to keep things small. Comes with a standard uFL connector on the end.

In stock
+ −
Add to wish list
2590-ADA Adafruit Metro Mini 328 - 5V 16MHz
US$26.17
METRO Mini is the culmination of years of playing with AVRs: we wanted to make a tiny, breadboard-friendly development board that is easy to use and is hacker friendly. Metro Mini can be programmed with the Arduino IDE (select 'UNO' in the boards dropdown).
In stock
+ −
Add to wish list
PiTFT Plus 480x320 3.5" TFT+Touchscreen for Raspberry Pi
US$69.30
It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer "2x20 connector" Raspberry Pi's. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
Delivery within 2-3 weeks
+ −
Add to wish list
2465-ADA PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C
US$34.92
PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.
Delivery within 2-3 weeks
+ −
Add to wish list
1500-ADA Adafruit Trinket - Mini Microcontroller - 3.3V Logic - MicroUSB
US$12.17
Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. ATtiny85 on-board, 8K of flash, 512 byte of SRAM, 512 bytes of EEPROM.
In stock
+ −
Add to wish list
2457-ADA Toggle Clamp - Large Size - 201B
US$8.67
Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision!
Delivery within 2-3 weeks
+ −
Add to wish list
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
US$53.82
Rather than spending weeks or months fiddling with algorithms of varying accuracy and complexity, you can have meaningful sensor data in minutes thanks to the BNO055 - a smart 9-DOF sensor that does the sensor fusion all on its own!  You can read the data right over I2C and Bob's yer uncle.
In stock
+ −
Add to wish list
Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit
US$39.91
You can now create a dazzling display with your Raspberry Pi Model Zero/A+/B+/Pi 2 or Pi 3 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease.
Delivery within 2-3 weeks
+ −
Add to wish list
1099-ADA USB OTG Host Cable - MicroB OTG male to A female
US$3.85
This cable looks like a USB micro cable but it isn't! Instead of a USB A Plug, it has a USB A Socket on the end. This cable is designed for use with OTG (On the Go) host devices (like the Arduino Due or many tablets) so you can connect a mouse, keyboard, or any other USB device.
In stock
+ −
Add to wish list
2348-ADA Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
US$34.65
This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.
Delivery within 2-3 weeks
+ −
Add to wish list
2024-ADA Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
US$19.25
This touch-able add on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors.
In stock
+ −
Add to wish list
1 - 15
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
17 - 31