Our Brands

Adafruit

1 - 9
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
11 - 25
Newest Items First
15 Per Page
3894-ADA JST PH 3-Pin to Female Socket Cable - 200mm
US$1.93
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. Great for extending or connecting sensors.
In stock
+ −
Add to wish list
3893-ADA JST PH 3-Pin to Male Header Cable - 200mm
US$1.93
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. Great for extending and connecting sensors.
In stock
+ −
Add to wish list
2994-ADA Tower Light - Red Alert Light with Buzzer 12VDC
US$38.43
This device is a 12VDC red alert tower light with buzzer, with which you can monitor the status of a machine or project. They are easy to attach with mounting holes, and you can rotate the light mount, so it can be horizontal, vertical or any angle in between (180 rotation). Alert tower lights are really easy to use. The brown wire is the common +12V power line, then the other wires are connected to ground to activate the LED light or buzzer. The red wire controls the red LED light and the orange wire is what controls the buzzer which will sound continuously when the wire is grounded.
In stock
+ −
Add to wish list
409-ADA High Brightness Aqua Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a clear coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 150 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
408-ADA High Brightness Blue Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a blue coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 82 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
407-ADA High Brightness Green Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a lime green coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 123 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
405-ADA High Brightness Orange Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a orange coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 70 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
404-ADA High Brightness Pink Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a pink coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 27 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
403-ADA High Brightness Red Electroluminescent (EL) Wire - 2.5 meters - High brightness, long life
US$18.48
We've got 2.6mm thickness EL wire, with a red coat, pre-cut and soldered to a standard quick-connect EL wire. It is made with the latest technology and twice as bright as 'standard' 2.3mm EL - running it at 1.5KHz/90V it emits 32 cd/m^2 or light and a half-life (50% brightness reduction) after 3000 hours of continuous use. Draws about 10mA per meter. The capacitance is about twice that of 'standard' EL, 11 nF/m so if you're using an inverter, it will drive only half as much high brightness wire as standard.
In stock
+ −
Add to wish list
367-ADA Tactile Button switch (6mm) x 20 pack
US$3.85
The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They come in a pack of 20, they're pretty handy so you'll want to keep them around.
In stock
+ −
Add to wish list
3105-ADA Mini Illuminated Momentary Pushbutton - Blue Power Symbol
US$3.00
This Mini Illuminated Momentary Power Button is an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switches and can snap into a breadboard. There are an additional two pins that connect to the anode and cathode of a small LED that shines through the top. Note that this is a momentary button, not a on-off switch! Also, the LED is not connected to the switch in any way, and does not include a resistor. You'll need to add your own ~1K resistor and control the LED with a microcontroller pin or whatever you like.
In stock
+ −
Add to wish list
3104-ADA Mini Illuminated Momentary Pushbutton - Red Power Symbol
US$3.00
This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project.  The tact switch is about the same size as 6mm tactile switches and can snap into a breadboard. There are an additional two pins that connect to the anode and cathode of a small LED that shines through the top. Note that this is a momentary button, not a on-off switch! Also, the LED is not connected to the switch in any way, and does not include a resistor. You'll need to add your own ~1K resistor and control the LED with a microcontroller pin or whatever you like.
In stock
+ −
Add to wish list
2993-ADA Tower Light - Red Yellow Green Alert Light with Buzzer - 12VDC
US$42.35
Alert tower lights are really easy to use. The brown wire is the common +12V power line, then the other wires are connected to ground to activate each of the three LED lights: red wire for red light, yellow wire for yellow light and, you guessed it, green wire for green light. The final orange wire is what controls the buzzer which will sound continuously when the wire is grounded. We did notice that you can't have both the yellow and red lamps on at once, and in general its best to only have one lamp lit at a time for max brightness. The buzzer can be turned on whenever, it does not seem to be affected by the lights.
Delivery within 2-3 weeks
+ −
Add to wish list
3046-ADA Assembled Adafruit Feather HUZZAH with ESP-F v1.1 With Headers
US$29.45
This is the Assembled Adafruit Feather HUZZAH ESP-F v1.1 with headers - our take on an 'all-in-one' ESP-F v1.1 WiFi development board with built in USB and battery charging and ready to go immediately! Its an ESP-F v1.1 WiFi module with all the extras you need. At the Feather HUZZAH's heart is an ESP-F v1.1 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a USB-Serial chip that an upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings.
In stock
+ −
Add to wish list
790-ADA Ultimate GPS Module - 66 channel w/10 Hz updates - MTK3339 chipset
US$46.45
For those who want to integrate our awesome Ultimate GPS module into their own projects, we now have the raw sub-module available. Don't be fooled by it's small size, this is a very sensitive, high quality GPS module with all the extras you could want and more at under 6 grams! This module is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation.
In stock
+ −
Add to wish list
1 - 9
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
11 - 25