Our Brands

Adafruit

1 - 9
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
11 - 25
Sort by Price: High to Low
15 Per Page
1944-ADA PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
1944-ADA PowerBoost 500 Charger - Rechargeable 5V Lipo USB Boost @ 500mA+
US$26.17
This is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.
Delivery within 2-3 weeks
+ −
Add to wish list
2590-ADA Adafruit Metro Mini 328 - 5V 16MHz
US$26.17
METRO Mini is the culmination of years of playing with AVRs: we wanted to make a tiny, breadboard-friendly development board that is easy to use and is hacker friendly. Metro Mini can be programmed with the Arduino IDE (select 'UNO' in the boards dropdown).
In stock
+ −
Add to wish list
2900-ADA FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
US$26.17
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!
In stock
+ −
Add to wish list
2926-ADA Terminal Block Breakout FeatherWing Kit for all Feather Boards
US$26.17
The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded the PCB out to 2" x 2.5" with 3.5mm pitch terminal blocks down each side. There's also four mounting holes so you can attach the breakout to your enclosure or project.
In stock
+ −
Add to wish list
1460-ADA NeoPixel Digital RGB LED Weatherproof Strip 30 LED -1m - BLACK
1460-ADA NeoPixel Digital RGB LED Weatherproof Strip 30 LED -1m - BLACK
US$26.11
These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove the strip from the casing. This is the strip with black flex PCB, its identical to the white 30 LED/meter except it has a different color mask on the flex strip.
In stock
+ −
Add to wish list
2652-ADA Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
US$25.82
This precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with  ±1 meter or better accuracy!
In stock
+ −
Add to wish list
5710-ADA Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
US$25.43
Adafruit Feather RP2040 with DVI Output Port - Works with HDMI
In stock
+ −
Add to wish list
2909-ADA USB 2.0 and Ethernet Hub - 3 USB Ports and 1 Ethernet
US$24.52
This handy combo-hub has 3 USB 2.0 ports, and a AX88772A Ethernet transceiver. This chipset is really common and can be used by any Linux, Mac or Windows computer. It's particularly handy for the  Raspberry Pi A+ or brand new Raspberry Pi Zero which is tight on USB ports and has no Ethernet out. We did some basic tests and got 11+ MB/s transfer speeds on our Pi Zero.
In stock
+ −
Add to wish list
324 Stepper motor - 200 steps/rev, 12V 350mA
324 Stepper motor - 200 steps/rev, 12V 350mA
US$24.50
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery.
In stock
+ −
Add to wish list
3013-ADA Adafruit DS3231 Precision RTC Breakout
US$24.42
This is the finest RTC you can get, and now we have it in a compact, breadboard-friendly breakout. With a coin cell plugged into the back, you can get years of precision timekeeping, even when main power is lost. Great for datalogging and clocks, or anything where you need to really know the time. Comes as a fully assembled and tested breakout plus a small piece of header. You can solder header in to plug it into a breadboard, or solder wires directly.
Delivery within 2-3 weeks
+ −
Add to wish list
315 Clear 'Piranha' Super-flux RGB (tri-color) LED (25 pack) - Common Anode
315 Clear 'Piranha' Super-flux RGB (tri-color) LED (25 pack) - Common Anode
US$23.61
Clear 5mm tri-color LEDs with separate red, green and blue LED chips inside! Nice bright indicator or illuminator, and fun to color-swirl. 80 degree viewing angle. You can plug these into a breadboard diagonally.
Delivery within 2-3 weeks
+ −
Add to wish list
1732-ADA 20W 4 Ohm Full Range Speaker
1732-ADA 20W 4 Ohm Full Range Speaker
US$23.45
This high power 4" diameter speaker will amp up any audio project where you need loud sound! It is 4 ohm impedance, rated for 20W continuous power. (This thing is really loud) It also has four handy mounting tabs 3 inches apart, and a grill that fits on top. The grill is to protect the cones, and is not necessary for use. 
Delivery within 2-3 weeks
+ −
Add to wish list
413-ADA Large push-pull solenoid
US$23.03
This solenoid in particular is nice and strong, with a 40mm long body and a 'captive' armature with a return spring. This means that when activated with up to 12VDC, the solenoid moves and then the voltage is removed it springs back to the original position, which is quite handy. Many lower cost solenoids are only push type or only pull type and may not have a captive armature (it'll fall out!) or don't have a return spring. This solenoid has 4xM3 (metric) threaded holes in the bottom for easy mounting.
In stock
+ −
Add to wish list
2088-ADA Adafruit 1.44" Color TFT LCD Display with MicroSD Card breakout - ST7735R
US$23.03
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.44" display has 128x128 color pixels. Unlike the low cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 16-bit color using our library code. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as a ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16/FAT32 formatted microSD card.
Delivery within 2-3 weeks
+ −
Add to wish list
659 FLORA - Wearable electronic platform: Arduino-compatible
659-ADA FLORA - Wearable electronic platform: Arduino-compatible - v3
US$23.02
The FLORA is small (1.75" diameter, weighing 4.4 grams). The FLORA family also has the best stainless steel threads, sensors, GPS modules and chainable LED NeoPixels, perfect accessories for the FLORA main board. The FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable, no additional purchases are needed!
In stock
+ −
Add to wish list
1 - 9
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
11 - 25